Small & Partial Kitchen Remodels in Tice - One Written Price, No Change Orders

Small and Partial Kitchen Remodels in Tice Run From About $14,000 to $45,000 and Give You a Functional, Updated Space Without Tearing the Whole Room Apart

A small or partial kitchen remodel in Tice typically costs between $14,000 and $45,000 and focuses on upgrading one or two key areas, cabinets, countertops, flooring, or swapping a tired sink-and-faucet setup, without moving walls or gutting the entire room. Most partial jobs take two to five weeks from demo to final walkthrough, depending on what you’re replacing and whether Lee County’s post-Ian inspection schedule has room when we pull the permit. Call (844) 638-7249 to schedule a free on-site estimate with Derek Hollenbeck and we’ll build a scope that fits how your Tice kitchen actually gets used.

Call (844) 638-7249

What a Partial Kitchen Remodel Actually Looks Like in a Tice Home

If you’re in a 1950s or 1960s concrete block house near Buckingham Road or Ortiz Avenue, your kitchen is probably a galley layout with original flat-panel cabinets, laminate counters that have seen better decades, and a single-basin sink that has never been deep enough. You don’t need a full-scale Kitchen Remodeling in Tice overhaul. You need the worn-out parts replaced with materials that hold up to humidity and daily use, and you need the work done without a six-month construction headache.

That’s exactly what our kitchen remodeling crew does. We define the scope tightly: maybe it’s new base and wall cabinets, a quartz or granite countertop, a deeper undermount sink, and a tile backsplash pulled up to the underside of the upper cabinets. The floor stays. The plumbing rough-ins stay. The ceiling and walls stay. We’re replacing surfaces and fixtures inside the existing footprint. And when we find the inevitable hidden water damage behind a 50-year-old sink base, a problem we see on about one in three Tice partial remodels, we handle it before it becomes a mold colony that spreads into the wall cavity.

Stage by Stage: How We Run a Partial Kitchen Remodel From First Call to Final Walkthrough

A partial kitchen remodel in Tice follows a tight sequence. Here’s what the five stages look like on the ground, with real durations so you know when decisions need to be made and when your kitchen comes back online.

1. On-Site Measure, Scope Walk, and Design Consult (Day 1, One Visit)

We come to your home in Tice, take laser measurements of the existing cabinet runs, countertop footprint, sink base, and backsplash walls. We check for soft spots under the sink, look at the condition of the shutoff valves, and note whether the existing electrical has GFCI protection at the countertop outlets, code now requires it, and many older Tice homes do not. By the end of this visit you’ll have a line-item scope and a fixed price that won’t change unless you ask us to add work. This is where you choose your material direction: cabinet door style and finish, countertop material and edge profile, sink configuration, backsplash tile.

2. Permit Application and Material Order (Week 1, Behind the Scenes)

Because Tice is unincorporated Lee County, all permits flow through the county building department in Fort Myers. We submit the permit application immediately after you sign, and we schedule the rough and final inspections at the same time. Post-Ian, that prescheduling is the only way to avoid a two-week waiting gap mid-project. While the permit processes, we order your cabinets, countertop slab, sink, faucet, and tile. Cabinet lead times run two to six weeks depending on whether you choose stock, semi-custom, or custom boxes, and we set the start date around the delivery date so your kitchen isn’t torn apart with nothing to install.

3. Demo, Prep, and Rough-In Corrections (Days 2-3)

We disconnect and cap the plumbing, pull the old sink and faucet, remove the existing countertops, and take out the cabinets we’re replacing. We cut back any water-damaged drywall behind the sink base and replace it with moisture-resistant board. If the existing shutoff valves are corroded or don’t fully close, something we run into constantly on the original galvanized plumbing still present in some Tice homes, we swap them for quarter-turn brass stops. The electrician adds GFCI outlets where code requires them. By the end of day three, the space is clean, dry, and ready for what’s new.

4. Cabinet Install, Countertop Template, and Tile Prep (Days 4-10)

Cabinets go in first, leveled and shimmed on floors that haven’t been truly flat since Johnson was in office. We install the sink base, set the drawer stacks, hang the uppers. The countertop fabricator templates directly off the installed cabinets for a tight fit. Stone fabrication and install typically takes five to seven business days. While you wait on the slab, we install the backsplash tile, which goes faster than you’d expect when the upper cabinets are already in place and the layout is a simple running bond or subway pattern. Once the countertop is set, we mount the sink and faucet, hook up the drain, and reconnect the plumbing.

5. Finishing Details, County Inspection Signoff, and Walkthrough (Days 11-14)

The electrician installs your new under-cabinet lighting and any receptacle trim. The plumbing gets a final leak check under full water pressure. Lee County’s inspector signs off on the rough and final inspections we prescheduled weeks earlier. We walk the kitchen with you, run every drawer, test every outlet, and make sure the silicone bead at the backsplash-to-countertop joint is clean and continuous. Then you cook dinner in your own kitchen that same evening.

If the scope creeps, you decide. We never add a change order without a written line-item price you approve first. That’s the upfront pricing commitment Derek Hollenbeck built into every Groundwork Construction Co. job.

The Options You’ll Choose Between for a Partial Kitchen Remodel

A small kitchen remodel is mostly a series of material decisions. Here are the choices where the honest trade-offs matter most.

• Cabinet construction: Stock cabinets ship in one to two weeks and keep the budget lower, but you’re limited to standard widths and a handful of door styles. Semi-custom cabinets let you adjust drawer configurations and choose full-extension soft-close glides with dovetailed drawer boxes, and they run about 30 to 50 percent more. For most Tice kitchens under 200 square feet, semi-custom base and wall cabinets add real usability without blowing the budget. We use KraftMaid for most semi-custom jobs because the lead times are consistent and the plywood box construction holds up better in humidity than particleboard alternatives.
• Countertop surface: Laminate is the lowest-cost option and today’s high-definition patterns look better than the originals you’re replacing, but it scratches and delaminates at seams over time. Quartz costs more up front and requires no sealing, ever, and it handles the daily humidity swings in a Tice kitchen without movement. Granite is a natural stone option that needs annual sealing but offers edge profiles and veining patterns quartz can’t match. A typical partial kitchen with 25 to 35 linear feet of countertop runs $2,500 to $6,000 in quartz, $2,000 to $5,000 in granite, and $800 to $1,800 in laminate, installed.
• Backsplash height and tile choice: A four-inch backsplash in the same material as the countertop is the budget default, clean and easy. A full-height tile backsplash running from counter to upper cabinets adds $800 to $1,500 on a typical partial kitchen, more if you choose handmade tile or a complex pattern, and it makes the room look finished in a way the short splash never does. Subway tile in a running bond pattern is the most common choice we install in Tice, it’s timeless, easy to clean, and the material cost stays low enough that labor is most of what you’re paying for.
• Sink configuration: A single-basin undermount sink in 16-gauge stainless steel, 10 inches deep, changes how you use the kitchen more than almost anything else. Add a pull-down faucet with a magnetic docking spray head and you’ve eliminated the two biggest daily frustrations of the original 1960s setup. If you’re keeping the existing sink base cabinet, the sink cutout dimensions dictate what fits, and we’ll measure that on day one so you’re not choosing sinks that won’t work.

We don’t push you toward the most expensive option. We ask how you cook, how many people live in the house, and whether you plan to stay five years or twenty. The choices follow from that.

What a Small Kitchen Remodel Costs in Tice, FL

Small and partial kitchen remodels in Tice, FL run $14,000 to $45,000. The spread is wide because the job definition varies enormously. A cabinet-and-countertop refresh with a new sink, stock cabinets, and a laminate countertop lands near the bottom. A semi-custom cabinet replacement with quartz countertops, a full-height tile backsplash, under-cabinet lighting, new GFCI circuits, and a deep single-basin sink with a high-arc faucet climbs toward the high end. Here are the four variables that move the number most:

• How many cabinets you’re replacing: Replacing just the base cabinets and leaving the uppers alone is less expensive than doing both. A typical galley kitchen might have 8 to 12 base cabinets and 6 to 8 uppers. Each box carries its own material and install cost, and the hardware, soft-close glides, pulls, and hinges, adds up proportionally.
• Whether the plumbing rough-ins move: If we keep the sink in the same location and reconnect to existing supply and drain lines, plumbing stays a few hundred dollars. If you want the sink moved to a different wall, we’re cutting slab, running new drain line with proper venting, and pulling a plumbing permit modification. That alone can add $3,000 to $7,000 to the job, more if the cast-iron drain line under a 1960s slab is in rough shape.
• Countertop material grade: A level-one quartz in a standard color group is $55 to $75 per square foot installed. A level-four quartz with dramatic veining or a Cambria slab pushes north of $100 per square foot. On 30 square feet of countertop, that’s a $1,500 to $2,500 swing right there. Edge profile matters too: eased edge is standard, mitered or waterfall edges add fabrication cost.
• Electrical and code upgrades triggered by the permit: Lee County requires GFCI protection on all kitchen countertop receptacles. If your existing kitchen has ungrounded two-prong outlets or no GFCI, the permit triggers a correction. Adding a dedicated 20-amp circuit for a new microwave or under-cabinet lighting falls in the same category. These code-driven upgrades typically add $800 to $2,000 to a partial remodel and they are not optional.

Every written estimate you get from us breaks out labor, materials, permits, and any electrical or plumbing sub-work in separate line items. You see exactly where the money goes. Nothing is bundled into a round number you have to trust. That’s how Derek runs the entire Kitchen Remodeling division, and it’s why our clients don’t get surprised by change orders.

What Tice Homes Specifically Do to a Partial Kitchen Remodel

Tice’s housing stock changes how we approach even a small kitchen job. The typical home we work on here is a CBS ranch built between 1955 and 1975, with a galley kitchen running along one exterior wall. The wall behind the sink is usually exterior block, which means plumbing supply lines were often run through the block cells or stubbed up through the slab. When those original galvanized steel pipes are still in service, which is true in roughly half the unrenovated homes we open up, they’re corroded internally and the shutoff valves have seized. We plan for at least some plumbing correction on nearly every Tice partial remodel. We don’t charge you for it as a surprise, we write it into the initial scope as a line item we hope we won’t need but know we probably will.

The other Tice-specific factor is the permit and inspection timeline. Because we’re unincorporated Lee County, the county building department handles all permits. Post-Ian, the backlog means a partial kitchen permit might take 10 to 14 business days for plan review, and the inspections we need, a rough-in inspection if we open walls or modify electrical, and a final inspection at completion, must be scheduled at the time of permit application or we risk losing a week or more mid-job waiting for an inspector. We’ve been working in Tice long enough to build that scheduling discipline into every project. Out-of-area contractors who don’t preschedule inspections are the ones whose jobs sit idle with a completed rough-in and no signoff.

Homeowners in Tice often ask us to look at the bathroom while we’re there. Since both rooms share the same plumbing stack and the same era of construction, Small Bathroom Remodels in Tice frequently pair with a partial kitchen update, especially when the shutoff valves need replacing in both rooms anyway.

Frequently Asked Questions About Small and Partial Kitchen Remodels in Tice

Get a Fixed-Price Estimate for Your Tice Kitchen Remodel

If you’re in Tice and you’re tired of looking at cabinets that stick and a sink that’s too shallow, call (844) 638-7249 to schedule a free on-site estimate. Derek Hollenbeck or one of our background-checked project leads will walk your kitchen, take measurements, talk through material options that fit your budget, and leave you with a written, line-item price that won’t change. No pressure, no vague numbers, and a live person answers the phone 24/7. The estimate is free and the 730-Day Done Right Promise covers the work for two full years after we’re done.