What a Vinyl Fence in Tice Actually Costs and How Long It Takes
A vinyl fence installation in Tice runs $3,500 to $9,000 for a typical residential project, and most jobs wrap up in 2 to 5 working days once materials are on site. The spread comes down to linear footage, whether any old fencing needs to come out first, and how many gates and corners the layout requires. Call (844) 638-7249 for a free on-site estimate with real numbers, not a ballpark.
How We Install a Vinyl Fence - the Real Sequence From Digging to Cleanup
Vinyl fence work moves faster than most people expect, but there are distinct stages. Knowing the order helps you plan around the crew and make decisions without pressure.
Day 1 - layout, utility mark-out, and post-hole digging. We walk the property line with you and confirm exactly where the fence sits. Every post location gets marked with paint, and we call 811 to have underground utilities flagged before any shovel hits dirt. Once the lines are clear, we dig the post holes to a depth of at least 24 inches, which puts the footing below Lee County’s shallowest frost line and gives the fence real wind resistance. The concrete for each post gets mixed and poured the same day so it can begin curing overnight.
Day 2 - posts set, rails and panels begin. By morning the footings have set enough to hang rails and panels. We use pre-routed vinyl rails that lock into the posts with a tongue-and-groove system - no visible screws, no rust streaks down the face of the fence. Each section is leveled twice, once when the rail goes in and again after the panel is seated, so water runoff doesn’t pool against the bottom rail. If the ground slopes, we step the panels rather than rack them, because stepped vinyl fences keep the picket tops straight to the eye and drain better in Tice’s heavy summer rain.
Day 3 - gates, corners, and end posts. Gates eat the most labor on any vinyl fence job. Each gate post gets an extra bag of concrete and a stainless steel reinforcement insert so it won’t sag under the weight of a 6-foot-wide gate panel swinging in wind. We hang the gate, shim the hinges to get an even reveal top and bottom, and install a self-closing latch that meets Florida pool-code requirements if the fence encloses a swimming area. Corners and end posts get the same reinforcement treatment.
Day 4 - punch list and detail work. Post caps go on last, not first, because we wait until every panel is locked in before gluing the caps down with exterior-grade PVC cement. We walk the line, check each gate swing, and tighten every fastener. Scrap vinyl, concrete bags, and spoil dirt leave the site with us. The fence is ready to use the day we finish.
Day 5 (if needed) - longer runs and complex layouts. Properties over 200 linear feet, or layouts with multiple gates and tight interior corners, may push into a fourth or fifth working day. The extra time comes from layout accuracy, not from slowing down - we’d rather spend another morning double-checking post locations than rush and find a section 2 inches out of square.
Throughout the build, our crew are background-checked, uniformed tradespeople, not day laborers, and they carry the full scope of Groundwork’s insurance and workmanship backing. No unmarked trucks, no mystery subs.
The Options You’ll Choose Between for a Vinyl Fence
Vinyl fence isn’t one product. The choices you make at the start determine how the fence looks, how it handles Tice storms, and what it costs five years out.
- Panel height. Most Tice installations are 4-foot or 6-foot. A 4-foot panel costs less and works well for front-yard curb appeal where you don’t need privacy. A 6-foot panel gives you full privacy and is the minimum height we recommend for backyards facing a road or neighbor. Wind load climbs with height, so a 6-foot fence needs post holes dug a few inches deeper and a heavier concrete pour per post.
- Picket style: solid privacy vs semi-privacy vs scalloped. Solid privacy panels are tongue-and-groove with zero gaps, the most popular choice for rear property lines. Semi-privacy panels have a small air gap between pickets, which drops the wind load noticeably - worth considering if your lot faces an open canal or retention pond with sustained breeze off the Caloosahatchee. Scalloped panels (two lower rails, two higher rails, pickets arched between them) add a decorative look that suits front yards and garden enclosures.
- Post reinforcement. Standard vinyl posts are hollow and cap-topped. On any gate post, corner post, or end post, we spec a galvanized steel insert set in concrete and run full-height inside the vinyl sleeve. It adds about $40 per post and eliminates the sag or lean that cheap vinyl fences develop after a few rainy seasons.
- Gate configuration. A single walk gate runs $350 to $600 depending on width and hardware. A double-drive gate wide enough for a boat trailer or RV is a bigger line item, $800 to $1,400, because both gate leaves need reinforced posts, heavy-duty hinges, and a drop-rod to pin the inactive leaf. The gate type determines the post schedule, so we lock this in at the estimate stage.
- Color and finish. White and tan are the two vinyl colors we order most for Tice homes. Darker colors like clay or charcoal absorb more heat and expand further in direct sun, which can cause rail bowing on long unshaded runs if the panels aren’t gapped correctly during install. We gap every dark-color panel to the manufacturer’s thermal expansion spec, usually an extra 1/8 inch per joint, and none of it shows once the fence is capped.
For material quality, we source vinyl through established manufacturers whose capstock and co-extruded formulas hold up under Florida UV without chalking or yellowing. Truer words haven’t been said: cheap imported vinyl goes brittle in five years of Tice sun, and by year seven the bottom rails are cracking at ground level. We won’t install it. Homeowners planning a full Fence Installation in Tice often find vinyl hits the sweet spot between cost, look, and zero maintenance, which is why it’s now the most-requested material across Lee County.
What Vinyl Fence Costs in Tice, FL
A vinyl fence in Tice lands between $3,500 on the low end and $9,000 for a large or complex layout. The number moves on four variables, and we spell them out in every written estimate so you see exactly where the dollars go.
Linear footage is the biggest driver. Most Tice residential lots fall between 80 and 160 linear feet of fencing, measured along the property line. At $28 to $42 per installed foot for materials, labor, concrete, and cleanup, a straightforward 100-foot run with one gate runs around $3,800 to $4,600.
Demolition and haul-away of existing fence. If there’s an old chain-link or wood fence on the line, removing it and disposing of the debris adds $4 to $8 per linear foot. Posts set in concrete footers take extra labor to break out, and some older Tice homes have fence posts embedded in the original slab pour, which means core-drilling rather than digging.
Gate count and type. Every gate beyond the first adds cost, as does upsizing from a walk gate to a drive gate. A property with three walk gates and a wide RV gate will land near the top of the range. A single walk gate and no demolition keeps it near the bottom.
Lot grade and access. Sloped lots require stepped panel runs, which add cut time and more posts. Backyards with narrow side-yard access - common on the tighter 1950s-era lots in neighborhoods off Ortiz Avenue - mean hand-digging some post holes because a skid steer can’t fit. Hand work adds modest labor hours, but we account for it in the estimate so there are no change orders.
Every Groundwork estimate is a fixed-price, line-item quote. The number you see is the number you pay, backed by our 730-Day Done Right Promise. If a post settles or a gate drifts within two years of installation, we come back and make it right at our cost. Upfront pricing, no surprises.
Our fence installation crew has installed vinyl across every lot shape in Lee County, and we keep the process simple: measure once with you present, quote in writing, install to manufacturer spec, and stand behind the work longer than anyone else in the trade will.
How Tice Homes Specifically Shape a Vinyl Fence Job
Working in Tice means dealing with post-Ian lot conditions and Lee County’s permit reality, two things an out-of-town crew won’t plan around. Tice is unincorporated Lee County, so every fence permit runs through the county building department in Fort Myers - not a municipal office. Post-hurricane inspection backlogs mean the window between permit application and first inspection can stretch multiple weeks longer than what a Fort Myers city permit takes. We pre-schedule the footing inspection at the moment we file the permit, not after the holes are dug, because waiting until post-holes are open to call for an inspection can stall a job cold for a week or more. It’s a local scheduling quirk that separates crews who work here regularly from storm-chasers passing through.
The soil itself is sandy loam over a high water table. Dig more than 30 inches almost anywhere in Tice between June and October, and you’ll hit standing water in the hole. We over-excavate wet post holes by 4 inches and set each post in a dry concrete pour that displaces the water up and out, so the footing cures around undisturbed soil instead of slurry. It’s standard practice for this ground, and skipping it is why cheap fences start leaning toward the canal within 18 months.
Most of the houses we work on are 1950s-to-1970s concrete block homes on lots that have been fenced and refenced two or three times over the decades. We routinely dig up old steel T-posts, decayed wood footers, and the occasional buried concrete block from a long-gone property-line wall. That subsurface debris adds time to the post-hole phase, and we factor it in up front. The upside is that these older Tice lots tend to have clearly defined, surveyed property lines - neighbors have been living next to each other for 30 years and know where the boundary sits, which makes the layout walk faster and cleaner than it does in a brand-new subdivision where nobody’s staked the lot yet.
Some Tice homeowners pair a new vinyl perimeter fence with other exterior upgrades. We’ve fenced backyards where the next call was for a new Driveway Repair & Replacement in Tice or a fresh Asphalt Driveways & Resurfacing in Tice - the fence defines the yard, then the driveway anchors the front. It’s a natural sequence, and scheduling them back-to-back keeps the lot cleaner than spreading the work across separate months.
Serving Tice, FL - Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Vinyl Fence in Tice
Yes. Lee County requires a zoning permit for any fence over 3 feet tall, and most vinyl fences in Tice are 4-foot or 6-foot. The permit review checks setback requirements, height limits, and whether the fence encroaches on a recorded easement. We handle the permit application as part of the job, and the cost is included in your estimate.
A standard residential vinyl fence in Tice takes 2 to 5 working days from first dig to final cleanup. The timeline stretches when the layout includes multiple gates, tight side-yard access that requires hand-digging, or old fence demolition. The Lee County inspection schedule is the only variable outside our control, and we mitigate it by booking the inspection at permit filing.
Not with us. We quote fixed prices in writing, and the only thing that would change the number is if you add scope after we’ve started - extending the fence line, adding a gate, or asking us to remove buried debris we couldn’t see during the estimate walk. Even then, we price the change order before any extra work begins. No surprise invoices.
The vinyl material carries the manufacturer’s limited lifetime warranty against peeling, chalking, and manufacturing defects. Our workmanship is covered by the 730-Day Done Right Promise: if a post leans, a gate sags, or a panel pulls loose because of how we installed it, we come back and fix it at our expense. Two full years, no fine print.
You can, but it costs more in total because you’re paying for two mobilizations and two permit cycles. Phasing a vinyl fence makes the most sense when you’re doing front-yard curb appeal now and saving the backyard privacy run for a later budget year. We’ll design the initial phase so the future tie-in points are clean and don’t require tearing out finished work.
Get a Written Estimate for Your Vinyl Fence in Tice
A solid vinyl fence starts with a real measurement, not a guess over the phone. Call (844) 638-7249 to schedule a free on-site estimate at your Tice property. We’ll walk the line with you, talk through material choices, and hand you a line-item price before we leave - no pressure, no same-day closing pitch. From foundation to finish line, Groundwork Construction Co. builds fences that stay straight, and we back every one of them with a 730-Day Done Right Promise.
Written by Derek Hollenbeck, Owner at Groundwork Construction Co., serving homeowners across Lee County with upfront pricing and workmanship you can hold us to.