What cabinets and countertops actually cost, and how long the work takes, in Burnt Store Marina
Cabinets and countertops in Burnt Store Marina typically run $6,000-$19,500 as a combined project, with most kitchen updates we handle landing in the $8,000-$15,000 range depending on material grade and linear footage. A straight cabinet-and-counter swap where nothing moves usually takes our crew 5-7 working days on site; if the home needs drywall patching, electrical tweaks, or plumbing adjusted behind the old cabinets, expect more like 8-12 working days. Call (844) 638-7249 and we’ll give you a written line-item estimate specific to your kitchen, not a ballpark. The number you see is the number you pay.
How our cabinet and countertop installation process works in Burnt Store Marina
We know you’re trying to plan around a torn-up kitchen, so here’s the actual sequence and the decisions you’ll make at each stage. No generic fluff.
Day 1 - Site prep and existing teardown. We protect your floors with ram board and poly, set up dust containment, and disconnect plumbing and electrical to the sink and any under-cabinet appliances. The old cabinets and countertops come out in sections, and we’ll cut any remaining fastener stubs flush with the wall. If we find rotted drywall or water-damaged framing behind the sink base (we see this regularly in Burnt Store Marina homes due to the humidity and occasional storm-driven leak paths), we stop and show you exactly what needs repair before we proceed. You’ll confirm your cabinet door style, finish, and hardware selections before we place the order, usually 2-3 weeks before Day 1.
Days 2-3 - Wall and rough-in prep. This is where the “scope creep” contractors skip gets addressed. We square up any walls that are out of plumb (common in 1980s-era concrete-block homes around Charlotte Harbor where original framing wasn’t dead-level), move or add electrical boxes for under-cabinet lighting or relocated appliance circuits, and rough in any plumbing changes if you’re shifting the sink location. These two days determine whether the install goes smoothly or fights us later. Nothing gets hidden behind a cabinet until our lead on site signs off on the substrate.
Days 4-5 - Cabinet install and leveling. Upper cabinets go in first on a ledger board so the weight stays off the base cabs during alignment. We shim every box to level across the entire run, including filler strips at walls and appliance openings, then fasten face frames together with trim-head screws (not just finish nails). Base cabinets get the same treatment, and we cut scribe trim to follow any wave in the floor or wall. Doors and drawers go on last so they don’t get dinged during the heavy work. At this stage you’ll see the actual footprint and can walk through drawer-access and clearance before we lock everything in.
Days 6-7 - Countertop template, fabrication pause, and sink set. For natural stone tops, our fabricator comes to Burnt Store Marina to laser-template the installed cabinets - that template accounts for every wall bump and corner angle. Fabrication typically takes 5-10 business days off-site. Once the slab arrives, we dry-fit it, check overhang consistency, and set it into a bed of color-matched adhesive. The sink gets undermounted or dropped in that same day, the plumbing reconnected, and the dishwasher and cooktop re-installed if applicable. A silicone bead at every seam and backsplash edge finishes it.
Final day - Hardware, adjustments, and walkthrough. All door and drawer fronts get adjusted for reveal and clearance. We install pulls and knobs, touch up any trim paint, vacuum the cabinets inside and out, and walk you through every door and drawer so nothing surprises you later. Derek Hollenbeck expects every job to look like it was the only one we had on the schedule that week. The 730-Day Done Right Promise means if a drawer binds or a door sags within two years, we come back and make it right.
The cabinet and countertop options you’ll choose between for a Burnt Store Marina kitchen
These decisions drive the final look, the durability in our salt-air environment, and most of the price difference between a $6,000 job and a $19,000 one.
- Stock vs. semi-custom vs. full-custom cabinets. Stock cabinets (KraftMaid is one partner line we work with) ship in standard 3-inch width increments and limited door profiles; they install fastest and keep costs down. Semi-custom gives you more depth options, extended stile-and-rail door styles, and finish choices that hide the humidity expansion we see near Charlotte Harbor. Full custom lets us build exactly to a tricky corner or a specific appliance panel spec - more labor, more lead time, but zero filler strips.
- Solid wood vs. plywood box construction. We strongly recommend plywood boxes with solid-wood face frames for any Burnt Store Marina kitchen. Particle-board boxes swell permanently in the high ambient moisture that comes off the harbor and canal system, especially on lower cabinets near slab floors. Plywood costs more per linear foot but won’t crumble if the dishwasher ever leaks.
- Laminate vs. quartz vs. granite vs. solid surface countertops. Laminate handles moisture fine and costs the least, but it won’t survive a hot pan set directly on it. Quartz gives you a non-porous surface that needs zero sealing and resists staining from the citrus and seafood prep common in Florida kitchens. Granite requires annual sealing but brings a natural depth of pattern no manufactured slab replicates. Solid surface (Corian-type) allows integrated sinks and seamless corners but scratches more easily than quartz. For this climate, quartz tends to be the smartest long-term play.
- Edge profile and overhang. A simple eased edge costs nothing extra; an ogee or waterfall edge adds fabrication time and material waste. Overhang beyond 12 inches for bar seating needs steel or corbel supports, which we’ll factor into the estimate.
- Soft-close hardware and drawer organization. Blum or similar undermount slides with soft-close are standard on every job we install. Pull-out trash bins, roll-out tray dividers inside lower cabinets, and dovetailed maple drawer boxes are line items you’ll see on a written estimate. They’re not padding; they affect daily usability more than the door style does.
What cabinets and countertops cost in Burnt Store Marina
A cabinet-only install in Burnt Store Marina runs $4,000-$13,000; countertops alone run $2,000-$6,500. Together, a typical kitchen ranges from $6,000 for a modest laminate-and-stock-cabinet refresh to $19,500 for a full semi-custom-and-quartz overhaul with soft-close everything and under-cabinet lighting.
Here’s what pushes you toward the low or high end of that range:
- Linear footage of cabinets. A 10×10 galley kitchen needs far less than an L-shaped kitchen with a 9-foot island. Every extra foot of lowers and uppers adds material and install labor.
- Countertop material and slab count. A single slab of basic quartz costs less than a two-slab exotic granite with a waterfall edge. The slab thickness and edge profile also move the fabrication charge.
- Wall condition behind the old cabinets. Burnt Store Marina homes built in the 1980s and 1990s often have drywall that’s been patched around multiple prior remodels. If we’re cutting out water-damaged sections or strapping walls flat, that’s additional prep hours.
- Electrical and plumbing changes. Moving a sink drain, adding a dedicated circuit for a microwave drawer, or adding under-cabinet LED runs all involve a licensed electrician or plumber - we pull that permit and those line items appear on your estimate with no markup surprise.
- Appliance panel integration. Panel-ready dishwashers and refrigerators need custom cabinet faces matched to the run; that pushes the cabinetry scope into semi-custom territory.
Every estimate we write for cabinets and countertops in Burnt Store Marina is line-item and fixed. You’ll see the per-linear-foot cabinet cost, the slab material and fabrication charge, disposal, hardware, and any plumbing or electrical work broken out separately. Our upfront pricing means the number you approve is the number you pay. Call (844) 638-7249 to get yours.
Why Burnt Store Marina homes demand a specific approach to cabinets and counters
Burnt Store Marina isn’t a generic Florida subdivision. It’s a 1980s-to-2000s-era planned marina community sitting directly on Charlotte Harbor, and the salt air alone means we spec every cabinet fastener in hot-dipped galvanized or stainless - standard zinc-coated hardware corrodes visibly within two years of that constant onshore breeze. More than half the homes we work in here are concrete-block construction, which means every upper cabinet gets anchored into solid substrate with Tapcons or sleeve anchors, not just toggle-bolted into drywall.
The post-Hurricane Ian reality changed the game entirely for any interior work here. Charlotte County’s building department, still working through a permit backlog from the 2022 storm, scrutinizes every project that touches a kitchen - because so many homes are being raised to meet updated FEMA Base Flood Elevations, and the county wants to ensure interior renovations don’t compromise the elevation compliance on file. If your Burnt Store Marina home is on a canal side or near the harbor frontage, and we’re pulling cabinet permits, expect the inspector to verify that finished-floor and electrical-outlet elevations match the elevation certificate. It’s a layer most inland contractors never face. Our team has pulled permits in both Charlotte and Lee County jurisdictions here, so we know the split-jurisdiction trap along Burnt Store Road and we handle it before it holds up your schedule. Homeowners often pair this work with a full Kitchen Remodeling in Burnt Store Marina when the scope expands beyond cabinets, and our kitchen remodeling crew can pivot from this job into that scope without a second mobilization.
Serving Burnt Store Marina, FL - Our Local Coverage Area
We’re based in the Burnt Store Marina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently asked about cabinets and countertops in Burnt Store Marina
A straight swap with no plumbing or electrical changes typically takes 5-7 working days on site, but the countertop fabrication pause adds another 5-10 days between cabinet install and slab set. Factor in roughly three weeks total from the day we start demo to the day you’re putting dishes back in the drawers. If we’re moving the sink, adding circuits, or doing drywall repair, the on-site portion stretches to about two weeks. We’ll give you a schedule in writing before we start, and we stick to it.
Yes, if electrical or plumbing connections are touched. Charlotte County requires a permit for any kitchen work that involves relocating or adding a circuit, moving a drain or water supply line, or altering the rough-in behind the cabinets. Even a straight cabinet swap that leaves existing connections untouched technically requires no permit for the cabinets themselves, but we pull one anyway if an inspector might question the scope - it protects you and keeps the job on record. Call (844) 638-7249 and we’ll check your specific project against current Charlotte County requirements.
Our workmanship is covered by the 730-Day Done Right Promise: if something we installed fails or isn’t right, we make it right at no charge. Cabinet manufacturers carry their own finish and structural warranties (KraftMaid, for example, offers a limited lifetime warranty on most lines), and stone fabricators typically warrant their seams and install for one year. We hand you all the warranty docs at the end of the job, not buried in an email folder.
Rarely without damage. Granite and quartz slabs are adhered to the cabinet tops with silicone or construction adhesive, and the act of separating them from the base cabinets almost always cracks the stone or breaks a seam. Laminate tops sometimes survive removal, but the buildup underneath can make reinstallation on new cabinets uneven. We’ll assess yours during the estimate; if there’s a path to saving them, we’ll tell you honestly and price accordingly. If not, replacing both at once saves you a second round of demo and dust later.
Plan on $6,000 to $19,500 for a combined cabinet-and-countertop install in Burnt Store Marina. Where you land inside that range depends on linear feet, material grade, and how much prep the existing walls need. Our estimates are free and line-item, so you’ll know exactly what your kitchen costs before you commit a dollar. Homeowners sometimes pair this project with a Walk-In Showers & Shower Remodeling in Burnt Store Marina or a Tub-to-Shower Conversion in Burnt Store Marina when they’re tackling multiple rooms, and we can bundle the estimate.
Get a free, written estimate for cabinets and countertops in Burnt Store Marina
Call (844) 638-7249 and we’ll schedule an on-site walkthrough at your Burnt Store Marina home at a time that works for you. We measure, talk through material options, check the wall and floor condition, and hand you a fixed-price line-item estimate - no pressure, no pricing games, delivered by a background-checked professional who arrives in uniform. Our phones are answered by a live person, 24/7, so you won’t get a voicemail black hole. Derek Hollenbeck and the Groundwork Construction Co. team have been building in coastal Florida long enough to know that a straight answer and a written promise are what actually close a deal. Let’s get your kitchen done right.
Written by Derek Hollenbeck, Owner at Groundwork Construction Co., serving Burnt Store Marina and surrounding Southwest Florida communities.