Kitchen Design & Layout in Bonita Springs - One Written Price, No Change Orders

What a Kitchen Design & Layout Actually Costs and Takes in Bonita Springs, FL

Kitchen design and layout in Bonita Springs, FL typically runs $14,000 to $45,000, and on an existing home, the design-and-build process takes four to seven weeks from the day we start-about two weeks of design and material selection, then two to five weeks of construction. That range covers a full layout rework: removing a wall to open sightlines, shifting the sink and range to new plumbing and electrical locations, new KraftMaid or comparable cabinetry laid out for real workflow, quartz or Cambria countertops with an island if space allows, and appliance-ready rough-ins. This is not a cabinet swap with the same footprint-this is rethinking how your kitchen functions for the way you actually live in it. For a firm in-person estimate with line-item numbers, call (844) 638-7249.

Call (844) 638-7249

How We Design a Kitchen Layout That Works-The Real Stage-by-Stage Process

Most homeowners we talk to have never been through a full kitchen design engagement before, so the sequence can feel opaque. Here is exactly how it goes, from the first measurement to the final walkthrough, with the decisions you make at each point.

Stage 1: On-site measurement, as-built, and the “how you cook” conversation (Days 1-3). We come to your Bonita Springs home and laser-measure every wall, window, soffit, and plumbing stub-out. Then we ask the questions that actually drive a layout: left-handed or right-handed cook, how many people use the kitchen at once, do you entertain in the kitchen or keep guests out of it, what frustrates you about the current layout. That session produces a dimensioned as-built and a written brief-no charge, no commitment. This stage also flags any structural realities that will constrain the design: load-bearing walls that cannot come out without an engineered beam, slab-on-grade floors that make drain relocation expensive, or post-Ian elevation requirements we will address in the local section below.

Stage 2: Concept layouts and the work triangle (Days 4-10). Back in the design office, Derek and the team produce two or three concept floorplans that respect the work triangle-sink, range, refrigerator within a few steps of each other but not crossing traffic paths-and account for the constraints we measured. We present these as scaled 2D plans with cabinet run lengths, island dimensions, and appliance zones clearly marked. You pick the layout direction, and we refine it based on your feedback. Most of our Bonita Springs clients land on a decision within one or two rounds of revisions. This is also when we spec the cabinet configuration: drawer bases versus door cabinets, pantry pull-out widths, and whether we are doing standard 36-inch uppers or stacking to the ceiling in a 9-foot room.

Stage 3: Material and fixture selection (Days 10-14). With the floorplan locked, we walk you through the material picks that define the look and the durability. Countertop material-quartz, granite, or solid surface-influences both cost and long-term maintenance. Cabinet door style, finish, and hardware. Backsplash material and layout. Sink configuration: single-basin farmhouse, undermount double, or integrated quartz. This stage also covers lighting placement so the layout supports task lighting where you prep, not just a center ceiling fixture. All selections go onto a written spec sheet that becomes part of the contract, so there are no substitutions later without your sign-off.

Stage 4: Permit set and build prep (Days 14-21). For a kitchen design that moves plumbing, electrical, or walls, Lee County requires a permit, and we pull it. We prepare the permit drawings, submit to the county, and order the long-lead items-cabinetry can take three to six weeks depending on the brand and finish, so we order early. While the permit processes, we finalize the construction schedule and order the rough materials. If a dumpster or port-a-john is needed for the job, that gets coordinated now. By the end of Stage 4, you know your exact start date and the day-by-day sequence.

Stage 5: Build-out and walkthrough (2-5 weeks). Construction follows the permit and the spec sheet exactly. Demolition and rough-in come first-we protect floors and seal off the work area with dust barriers. Plumbing and electrical rough-in, drywall repair, and flooring prep follow. Cabinetry install is typically a two-day process. Then templating for countertops, which usually takes a week from template to install. Backsplash, final plumbing and electrical trim, and appliance hookup round out the final week. We walk the kitchen with you before we consider the job complete, and everything is covered under our 730-Day Done Right Promise: if it is not right, we make it right, full stop.

This same measured process applies whether the kitchen is part of a larger Kitchen Remodeling in Bonita Springs scope or a standalone layout redesign-the design phase does not get shortcut just because the budget is smaller.

Layout and Material Decisions That Actually Change How a Kitchen Feels

Design magazines show endless options, but the real decisions fall into a handful of categories that affect daily life. Here are the ones where choosing one direction over another makes a practical difference.

• Galley versus L-shaped versus open-plan with island. A galley layout keeps plumbing consolidated and costs down-good for smaller Bonita Shores ranches where wall removal is not worth the structural cost. An L-shaped plan gains counter space without moving a wall. Opening to an island with seating requires more square footage and usually means moving a load-bearing wall, which adds beam engineering to the permit set. The right answer depends on how you cook, not what photographs well.
• Standard-depth versus counter-depth appliances. Counter-depth refrigerators sit flush with cabinetry and make a narrow kitchen feel wider, but they cost more and hold less. Standard-depth units protrude three to six inches into the walkway and dominate a tight layout. We measure the clearance and show you both footprints on the plan before you buy.
• Drawer bases versus door cabinets for lowers. Full-extension drawer bases cost more per linear foot than door cabinets with roll-out trays, but they put cookware at your fingertips without crouching. In a kitchen used daily by someone with back or knee trouble, drawer bases are not a luxury-they are functional infrastructure.
• Countertop overhang and seating clearance. If the island will have stools, we need 12 to 15 inches of overhang and at least 24 inches of knee space. A 36-inch-deep island with standard cabinets underneath does not leave enough legroom without a support bracket or steel reinforcement. We detail that on the plans so the countertop fabricator gets it right.
• Task lighting placement on the plan, not as an afterthought. Undercabinet LED strips, pendant spacing over an island, and a dedicated circuit for a microwave drawer all get located on the electrical plan during Stage 2, not flagged mid-construction when a wire is already buried in drywall.

We also handle the adjacent spaces that often get touched when a kitchen layout changes. Some Bonita Springs homeowners pair a kitchen reconfiguration with Vanities, Tile & Fixtures in Bonita Springs to update a nearby powder room at the same time, or with Small Bathroom Remodels in Bonita Springs when a guest bath sits off the kitchen corridor and finishes should match.

What Kitchen Design & Layout Costs in Bonita Springs, FL

A kitchen design and layout engagement in Bonita Springs runs $14,000 on the conservative end to $45,000 for a full reconfiguration with premium materials. That range is not a guess-it reflects the actual distribution of jobs we quote. The variables below explain what pushes a project to the low or high side of that window.

Layout complexity and wall removal. Keeping the sink and range in their existing locations avoids plumbing and electrical rough-in, which keeps the job near the lower end. Moving the sink to an island or relocating a range to an exterior wall means cutting slab, running new drain lines, and pulling an electrical permit-that alone can add $3,000 to $7,000 depending on access and soil conditions. Removing a load-bearing wall to open into a living area requires an engineered beam and a structural permit, adding $5,000 to $12,000.

Cabinetry grade and run length. Stock cabinets in standard widths with a limited finish palette sit at the entry price. Semi-custom KraftMaid cabinets-full plywood boxes, soft-close hardware, paint-grade or stained maple fronts, and exact-width filler-free runs-add 40 to 60 percent to the cabinet line. A 20-linear-foot kitchen in semi-custom runs roughly $10,000 to $18,000 for the cabinetry alone before installation.

Countertop material and island size. A basic quartz in a standard thickness on a 30-square-foot run costs less than a mitered-edge Cambria slab on a waterfall island. The countertop line can range from $2,500 to $9,000 depending on material, edge profile, and square footage.

Site conditions in Bonita Springs homes. Homes in the AE flood zone along the Imperial River corridor sometimes require electrical panel elevation as part of any permitted kitchen remodel-that is a cost unique to our area and not something a generic pricing guide accounts for. Pre-2000 homes also regularly contain asbestos in old sheet flooring or drywall compound, and if testing confirms it, abatement adds cost and days to the schedule.

We produce written line-item estimates-no lump-sum numbers without backup, no change orders unless you change the scope. The estimate includes the design work, permit fees, materials at cost, and labor. It does not include appliances you purchase separately, although we provide rough-in dimensions and spec sheets so your appliance order fits the layout.

What Bonita Springs Homes Specifically Do to a Kitchen Design Project

Bonita Springs housing stock falls into two buckets, and each drives a very different kitchen design conversation. The older concrete-block homes in Bonita Shores and the Imperial River neighborhoods-largely built between 1972 and 1985-sit on slab-on-grade floors in AE flood zones. Moving a drain line in these homes means cutting and patching concrete, and more critically, pulling a permit can trigger Lee County’s post-Ian substantial-damage review. A kitchen design that relocates plumbing and involves wall removal can, by the county’s math, push the renovation cost above 50 percent of the structure’s assessed value-at which point the entire home must be elevated to current Base Flood Elevation. We flag that risk in Stage 1 and, when it applies, we design the layout around keeping the sink and range in their original footprints to avoid triggering the threshold. This is not a concern in Naples or Fort Myers to the same degree-the Imperial River flooding during Hurricane Ian made the review process far more aggressive here.

The second bucket-1990s-and-newer homes in Pelican Landing, Palmira, and Bonita Bay-tend to be wood-frame over stem-wall or elevated-slab construction with taller ceilings and fewer flood-zone complications. The design challenge in these homes is usually the opposite: oversized great-room footprints where a kitchen can feel like a hallway appliance wall. The fix often involves adding an island to anchor the space and positioning the range as a focal point, not an afterthought against the farthest wall. Both building types exist across Bonita Springs, and our Kitchen Remodeling crew has worked on enough of each to know which constraints apply before we draw the first concept plan.

Frequently Asked Questions About Kitchen Design & Layout in Bonita Springs

Get a Free Kitchen Design Estimate in Bonita Springs, FL

If your kitchen layout is fighting you every time you cook, we can fix it. Call (844) 638-7249 and we will set up a free on-site measurement and design consultation at your Bonita Springs home. The visit includes a written scope-and-price estimate, no pressure and no obligation. A live person answers the phone-always. Or if you prefer to start the conversation by text or form, we respond within hours, not days. Upfront pricing, a clear timeline, and a design that actually fits how you use your kitchen. That is what we deliver.

Written by Derek Hollenbeck, Owner at Groundwork Construction Co., providing Kitchen Design & Layout services in Bonita Springs, FL.