What Vanities, Tile & Fixtures Actually Looks Like in Nocatee, FL
Vanities, tile and fixtures in Nocatee usually run between $9,000 and $28,000 as a combined package, and most projects take 2 to 4 weeks from the first day of demo to the final walkthrough. That range covers everything from swapping a single vanity, a backsplash and a light fixture in a powder room to gutting a master bath down to studs, relocating plumbing and laying floor-to-ceiling porcelain with a custom double vanity. Call (844) 638-7249 to schedule a free on-site estimate and get exact numbers on your space.
How We Handle Vanities, Tile & Fixtures from Start to Finish
This job follows a tight sequence. Skipping a stage or ordering materials out of turn is what turns a three-week bathroom refresh into a two-month headache. Here is how we run it.
Stage 1: Consultation and material selection (Days 1-7). We walk your bathroom with you, take laser measurements, check the existing plumbing rough-ins and drain locations, and map out exactly what stays and what goes. This is where you pick the vanity size and configuration, the tile type and layout pattern, and every fixture finish. We do not start demolition until every material is physically in hand. That means the vanity, the tile, the grout, the faucets, the mirror, the lighting package - all of it, on site, before a single tool touches drywall. Material lead times in Nocatee are real; custom vanities often take 4 to 6 weeks from order. We build that into the schedule at this stage, not after the room is torn apart.
Stage 2: Demolition and rough-in (Days 8-10). Old vanity comes out, tile gets stripped, the subfloor is exposed and inspected for any moisture damage. If you are relocating a vanity to a different wall, this is when the plumber moves supply lines and the drain stack. Electricians handle any outlet relocation or new circuit runs for lighted mirrors or sconces. We get rough inspections done at this stage - plumbing and electrical - so nothing gets buried behind drywall without sign-off.
Stage 3: Drywall, backer board and waterproofing (Days 11-14). Patched walls get finished and primed. In wet areas, we install cement backer board and a full waterproofing membrane system - Schluter Kerdi or similar - across every square inch that will see tile. This is not a corner we cut. Northeast Florida humidity means a shower surround that is not properly waterproofed will fail from the inside out within a few years, and you will not know it until the studs are rotting. We also float and level floors at this stage so the tile substrate is dead flat.
Stage 4: Tile, vanity and fixture installation (Days 15-20). Tile goes in first - floor tile, then wall tile - with a day for thinset to cure between floor and grout. Once tile is set and grouted, the vanity cabinet gets anchored to the wall and leveled. The countertop goes on, the sink gets set and hooked up, and the backsplash gets cut and installed. Then the plumbing trim-out: faucets, drain, p-trap, shutoff valves. The electrician returns to install fixtures - vanity lighting, any hardwired mirror, exhaust fan if we are upgrading it. Every fixture is tested for operation, every drain for leaks.
Stage 5: Final details and walkthrough (Days 21-22). Baseboards and any remaining trim go in. We silicon-seal every seam at the countertop-to-backsplash junction and around the sink. We clean the tile, polish the mirror and run every fixture through one more cycle. Then you walk the room with the project lead. If anything is not right, it goes on the punch list and gets resolved before we call the job done. The 730-Day Done Right Promise applies to every piece of this work - vanity, tile, fixtures, labor.
The Options You Will Choose Between for Vanities, Tile & Fixtures
Every material decision you make on this job affects both the final look and the upfront cost. You are not choosing between “good” and “bad” - you are choosing what fits your budget and how the bathroom wears over the next decade. Here are the real trade-offs.
- Vanity construction: stock, semi-custom or fully custom. Stock vanities from brands like KraftMaid ship in standard widths, typically 24 to 72 inches, at the lower end of the price curve. Semi-custom gives you width adjustments, drawer-bank swaps and finish choices. Fully custom means built-to-fit for an odd-size alcove, with full-extension soft-close drawers, dovetail joinery and a furniture-grade paint or stain finish. Custom looks exactly right but adds 4 to 6 weeks and a significant cost step compared to stock.
- Countertop material: cultured marble, quartz or natural stone. Cultured marble is the budget-friendly, seamless option - it is non-porous and easy to clean. Quartz is harder, resists stains and scratches, and comes in a wider range of looks. Natural stone like marble or granite is beautiful but requires sealing and will etch if you leave soap or cleaner sitting on it. For a master bath in Nocatee, quartz is the most common choice we install because it balances looks with low maintenance.
- Tile: ceramic, porcelain or natural stone. Ceramic is the most affordable and easiest to cut, fine for dry walls and low-traffic floors. Porcelain is denser, tougher and less absorbent - the right call for shower floors and steamy Florida bathrooms. Natural stone tile (travertine, slate, marble) looks incredible but needs annual sealing and costs more to install because it is harder to cut and requires more floor prep for deflection. Large-format porcelain, 24 by 48 inches, is what we are laying in a lot of newer Nocatee homes right now - fewer grout lines, cleaner look.
- Fixtures: finishes, brands and valve types. Chrome and brushed nickel are the workhorse finishes: durable, easy to match, lower cost. Matte black and polished brass are trend-forward but show water spots more readily and cost more per fixture. Kohler and Moen are our go-to brands for reliable cartridges and wide parts availability. The bigger cost variable is the shower valve: a standard pressure-balance valve is straightforward; adding a thermostatic valve with volume controls and body sprays is a different plumbing job entirely and can add thousands.
- Lighting and mirror configuration. A surface-mounted strip light over a frameless mirror is the simplest setup. Moving to hardwired sconces on either side of the mirror, or an LED-backlit mirror with built-in defogger, requires opening walls for new electrical boxes. The look is cleaner and the light is better, but it adds electrical labor and your choice of fixture price point.
What Vanities, Tile & Fixtures Costs in Nocatee, FL
You should expect to spend between $9,000 and $28,000 on a vanities, tile and fixtures project in Nocatee. The low end gets you a single-vanity swap with a cultured marble top, ceramic tile flooring in a modest footprint, and chrome fixtures, assuming plumbing and electrical stay exactly where they are. The high end covers a custom double vanity in a larger master bath, porcelain tile on the floor and in a full shower surround, quartz counters, upgraded matte-black or brass fixtures, new lighting circuits and some drain relocation.
What pushes the number:
- Vanity size and construction. A 30-inch stock vanity in white is a fraction of the cost of an 84-inch custom piece with a quartz top and furniture finish. The jump from stock to custom can double the vanity line item by itself.
- Plumbing relocation. Moving a drain stack or supply lines to a different wall adds a day of rough plumbing labor and opens the floor or wall. Not every layout change requires it, but when it does, it is typically the single biggest cost driver outside of tile square footage.
- Tile square footage and complexity. Tiling a 40-square-foot bathroom floor is one thing. Tiling that plus a shower surround up to the ceiling, with a niche, a bench and a herringbone accent band is a different scope entirely. Large-format tile and intricate patterns both add labor hours.
- Fixture grade and count. A single widespread faucet in brushed nickel costs less than a set of three fixtures - faucet, shower trim, tub filler - in a premium finish with thermostatic controls. Each additional fixture adds both the material cost and the plumbing trim-out labor.
- Permit and CDD scope. A straight finish swap with no layout changes typically does not trigger a permit in St. Johns County. Moving plumbing or electrical does, and the permit adds cost and inspection scheduling time. Our written estimates include the permit line item when one is required, so you see it before you sign.
Our estimates are upfront and line-itemed. The price you see is the price you pay. If something changes mid-project because you decide to upgrade a fixture or we uncover hidden subfloor rot, we write a change order with a fixed number before any extra work begins. No surprise charges at the end. Call (844) 638-7249 for a free, detailed quote on your vanities, tile and fixtures plan.
What Nocatee Homes Specifically Do to Vanities, Tile & Fixtures Work
Nocatee is not a typical northeast Florida suburb. It is one of the fastest-growing master-planned communities in the country, built almost entirely since 2007 on former Rayonier timberlands carved from low-lying pine flatwoods near the Intracoastal Waterway. The housing stock is dominated by production builders like DR Horton, Toll Brothers and David Weekley - concrete block first floors, wood-frame second floors, monolithic slabs. What that means for vanities, tile and fixtures is straightforward but specific.
Homes in the earliest villages, particularly around Tidewater, are now 12 to 17 years old. That is exactly when original builder-grade vanities start showing swollen MDF bases from years of bathroom humidity, when tile grout in shower surrounds cracks from slab settlement on the sandy fill that underlies much of Nocatee, and when builder-installed fixtures with cheap cartridges begin dripping or seizing. We regularly replace vanities in these homes where the cabinet box has absorbed enough moisture that the bottom panel is crumbling. It is a Nocatee-specific failure mode driven by the humidity cycle in a slab-on-grade bathroom with a single exhaust fan that has not been cleaned in a decade.
Permitting adds another local wrinkle. Because Nocatee operates under its own Community Development District, any project that involves moving a drain line or altering the bathroom footprint - which changes the fixture count for the drainage calculations the CDD cares about - can require CDD sign-off on top of the standard St. Johns County permit. It is a dual-approval process that catches off-duty contractors who only pull the county permit. We manage both because we have worked in Nocatee long enough to know the drill. If your project stays within the existing footprint and does not touch the drain layout, it is typically a finish-level job with no permit required, and we tell you that upfront either way.
For homeowners doing a broader refresh, many pair vanities, tile and fixtures with a full Bathroom Remodeling in Nocatee scope when the shower or tub surround is due as well. Others take the opportunity to address exterior work at the same time - we have had clients in the Greenleaf and Austins Creek villages schedule Tile Roofing in Nocatee inspections because their barrel tile is reaching the age where underlayment starts to go, or Specialty Roofing in Nocatee work on a flat-roof section over the lanai. Our Bathroom Remodeling crew handles the interior while the roofing team works outside, and you get one point of contact for both.
Every home we work on in Nocatee gets the same approach: materials ordered before demolition, all work covered by the 730-Day Done Right Promise, and a live person answering when you call.
Serving Nocatee, FL - Our Local Coverage Area
We’re based in the Nocatee area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked - Vanities, Tile & Fixtures in Nocatee
Most projects take 2 to 4 weeks from demo to final walkthrough. A simple single-vanity swap with a backsplash and a fixture upgrade in a powder room can finish in 5 to 7 working days. A master bath with custom cabinetry, floor-to-ceiling tile and plumbing relocation will push toward 4 weeks. The biggest variable is material lead time on the vanity itself - stock ships in days, custom takes 4 to 6 weeks. We order everything before we start and schedule the job only when all materials are on site. Call (844) 638-7249 and we can walk your specific bathroom and give you a schedule estimate.
If you are swapping the vanity in the same location, replacing tile on the floor or walls and updating fixtures without touching the plumbing layout, a permit is typically not required in St. Johns County. If we are moving a drain or supply lines, adding electrical circuits for new lighting or altering the bathroom footprint, a permit is required and we pull it as part of the job. In Nocatee specifically, projects that change the fixture count or drainage flow may also need CDD review, which we handle. We tell you during the estimate whether your scope triggers permitting so you know before you sign.
Yes. This is a focused job - vanity, tile and fixtures - without touching the shower, tub surround or bathroom layout. It is the right scope when the bones of your bathroom are solid but the surfaces and storage need an update. If the shower pan is leaking or the tub surround tile is failing, that is when the job expands into a full Bathroom Remodeling in Nocatee. We will not upsell you into a full gut if your bathroom does not need it.
We see cracked grout joints and loose floor tile in homes that are 10 to 15 years old, almost always caused by minor slab movement on the sandy fill that much of Nocatee is built on. Builders in the 2007-2012 era often set tile directly on the slab with a thin mortar bed, and over time the slab moves just enough to crack grout and pop tiles. We fix this by pulling the affected tile, checking the slab for flatness, using an anti-fracture membrane and re-setting with a polymer-modified thinset. It stops the cycle instead of just patching it.
Every vanities, tile and fixtures job we do in Nocatee is covered by our 730-Day Done Right Promise: if something is not done right, we make it right, no fine print, no runaround. Manufacturer warranties on the vanity cabinet, countertop material, tile and fixtures are separate and we walk you through what each covers - Kohler faucets have a limited lifetime warranty, quartz tops typically carry a 10- to 15-year manufacturer warranty, and custom vanity makers usually offer 1 to 5 years on the cabinet box and finish.
Get a Free Estimate for Vanities, Tile & Fixtures in Nocatee
If your bathroom needs a new vanity, fresh tile and fixtures that actually work the way they should, call (844) 638-7249. We will schedule a time to walk the space, take measurements and give you a written, line-itemed estimate at no cost - exactly what the job will cost and how long it will take. No pressure, no vague numbers. A live person answers the phone, day or night.
Written by Derek Hollenbeck, Owner at Groundwork Construction Co., serving Nocatee home renovations with upfront pricing and the 730-Day Done Right Promise.