Why Fort Myers Homeowners Choose Tremron Construction
If you’ve got a Tremron paver driveway, patio, or retaining wall in Fort Myers, we’re the crew that knows how to keep it solid through hurricane seasons and sandy soil shifts - and we also provide Cape Coral Tremron service. Groundwork Construction Co. of Fort Myers provides independent Tremron construction service across Lee County - from paver driveway installations and patio builds to wall repairs and fire pit teardown-and-rebuilds. We’ve worked with Tremron products for over a decade and understand the specific ways our local subgrade, stormwater, and chlorine-heavy pool environments beat on these hardscapes. Our number is (844) 638-7249 when you’re ready for a free estimate.
We are not authorized by or affiliated with Tremron - we’re an independent, licensed Fort Myers contractor who services and installs their products because we believe in the quality of the block, not because we’re on their payroll.
Why Trust Groundwork Construction Co. of Fort Myers for Your Tremron Construction?
Derek Hollenbeck grew up in the Iona area of Fort Myers and learned construction at Lorenzo Walker Technical College in Naples - he’s been running crews in Lee County for over two decades. Under his leadership, our technicians have spent years diagnosing and rebuilding Tremron hardscapes across the McGregor corridor, in Whiskey Creek, and out toward Gateway, with Tremron service in Lehigh Acres as well. We know which Havana Bay color lots fade fastest on south-facing pool decks and exactly how deep the limerock base needs to go under a Stonegate retaining wall to hold against our summer saturation cycle.
Every Tremron job we take on is backed by our 730-Day Done Right Promise - if the pavers shift or the wall leans within two years, we come back and make it right on our dime. We answer the phone live, 24/7, so when a tropical storm washes out your joint sand at 10 p.m., you reach a real person, not a voicemail. Our technicians show up background-checked and in uniform, with upfront pricing. The number you see on the written estimate is the number you pay, period. We don’t just break ground - we build something worth standing on.
Common Tremron Construction Problems We Fix in Fort Myers
These are the specific failures we see week after week in Fort Myers, tied to the actual product lines. If you’re searching for why your pavers look wrong or your wall is leaning, this is likely it.
- Settling and rutting on Tremron Havana Bay paver driveways. The number one call we get after a heavy rainy season. Fort Myers sits on sandy subgrade that shifts when water saturates the soil underneath the base. Many older Havana Bay installations around McGregor and the Edison Park area were laid over an inadequate crushed concrete base - maybe three inches when six is the minimum for our soil. The pavers start sinking in tire tracks within a year. We fix it by pulling the affected area, recompacting the subgrade with limerock, and relaying with a proper base depth and fresh polymeric sand.
- Efflorescence and color fading on Tremron Kingsford fire pit blocks near pools. Pool chemical splash - especially liquid chlorine - accelerates surface deterioration on these blocks. We see chalky white efflorescence bloom across the face of Kingsford fire pits within two seasons on pool decks in Cape Coral and south Fort Myers. It’s cosmetic, not structural, but it looks terrible. We strip and reseal with a breathable siloxane-based sealer that won’t trap moisture behind the block face - something a standard acrylic sealer will do, making the problem worse in our humidity.
- Outward lean on Tremron Stonegate retaining walls. Stonegate walls need a minimum of 12 inches of clean #57 gravel behind the block, plus a properly installed geogrid on any wall over three feet. We’ve rebuilt dozens of walls where the original installer used native sandy backfill and skipped the grid entirely. After a couple of wet-dry cycles, the wall starts leaning toward the downhill side and mortar joints crack at the coping. Once the wall has moved more than an inch out of plumb, patching won’t hold - it needs a tear-out and rebuild with proper drainage.
- Joint sand washout on Tremron Rio driveway and patio pavers. Rio pavers have a tighter joint profile than Havana Bay, but Fort Myers’ afternoon downpours still flush polymeric sand out of the joints if the sand wasn’t activated correctly during installation. We’ll find bare gaps where ants are tunneling in and weeds are popping through within six months. The fix is a full joint re-sand with a high-quality polymeric product, properly misted and cured - not just swept dry sand that’ll be gone after the next storm.
- Cracked coping and cap units on Tremron wall systems. This usually traces back to a missing or poorly bonded concrete adhesive on the cap course. In Fort Myers’ heat, the cap blocks expand and contract enough to walk off the wall if they’re only dry-stacked. We see it most on Stonegate walls facing west, where the afternoon sun bakes the cap units. We reset them with a flexible polyurethane construction adhesive rated for exterior masonry, which allows for thermal movement without losing bond.
Tremron Parts & Our Repair-vs-Replace Approach
We source genuine Tremron blocks, caps, and wall units directly from regional distributors - never generic substitutes from a big-box store. Tremron’s color blends (especially Havana Bay’s tumbled finish and the Rio series’ tighter tolerances) don’t match up to off-brand copies, and we won’t leave you with a patched area that looks like a different driveway.
That said, we don’t push a full rebuild unless the structure demands it. If your Havana Bay driveway has a settled section but the majority of the pavers are intact, we’ll lift, re-base, and relay - you keep your original pavers and avoid the cost of all-new material. Same with Stonegate walls: if the block isn’t cracked and the wall hasn’t shifted more than an inch, we can usually dig out behind it, install proper drainage and grid, and pull it back into alignment without replacing the block face. When the core structure is compromised - cracked footings, shattered blocks, or a wall that’s moved well out of plumb - we’ll be straight with you and recommend a full rebuild with a written, line-item price before we touch anything. For Tremron repair in Bonita Springs or Fort Myers, call (844) 638-7249 to have us take a look - estimates are free.
Our Tremron Service Process - Step by Step
- 1
On-site assessment. We walk the project with you and diagnose what’s actually failing - not just the symptom. On a leaning Stonegate wall, that means checking backfill depth, looking for geogrid, and measuring the lean with a level. On rutted Havana Bay pavers, we probe the base depth and check for washed-out subgrade. You get a written scope of work with the exact fix, not a vague “pavers need fixing” line item.
- 2
Material matching and sourcing. We pull color samples against your existing Tremron product - Havana Bay, Rio, Kingsford, Stonegate - and order genuine blocks from the distributor. If it’s an older lot that’s shifted slightly in color, we let you know before the material shows up, not after.
- 3
Repair or installation. For paver work, we excavate to proper depth, compact the subgrade with limerock, lay a leveled gravel base and bedding sand, and set each paver to the original pattern. For walls, we dig out behind the block face, install gravel backfill and geogrid to spec, and reset the wall with proper adhesive on the cap course. Crews are uniformed and background-checked - you’ll know who’s on your property.
- 4
Joint sand, compaction, and test. We sweep in polymeric sand, mist-activate it per the manufacturer’s cure schedule, and run a plate compactor over the surface (with a mat to protect the paver face). We walk the finished job with you and don’t call it done until you’re satisfied.
- 5
730-Day Done Right Promise kicks in. If anything shifts, settles, or washes out within two years of our work, you call us - and we come back. No deductibles, no fine print, no “that’s not covered.” We answer the phone live, 24/7.
Tremron Products We Service & Install in Fort Myers
We work across the core Tremron hardscape lines that are installed throughout Fort Myers neighborhoods. That includes the Tremron Havana Bay Paver series (driveways, pool decks, patios), the Tremron Rio Paver series (tighter joints, popular for modern driveways and walkways), the Tremron Stonegate Retaining Wall system (segmental walls up to six feet, fire pit surrounds), and the Tremron Kingsford Fire Pit Kit. We keep joint sand, edge restraint, and wall adhesive on our trucks, and we can pull genuine Tremron block from local distributors within a day or two for most common color blends.
We Also Service These Brands
While Tremron is a brand we know inside and out, we’re a full-scope construction company - not a single-product shop. We also install and service kitchens with KraftMaid cabinetry and Cambria, Silestone, and Kohler surfaces. If your project spans hardscape and interior work, one crew handles it from foundation to finish line.
FAQs - Tremron Construction Service in Fort Myers
No, we are not an authorized or factory-affiliated Tremron dealer. We’re an independent, licensed Fort Myers contractor who services and installs Tremron products because we’ve found their block quality and color consistency to be among the best for our local climate. Being independent means our loyalty is to you, not to a manufacturer’s quota.
We source genuine Tremron blocks from regional distributors for every repair and installation. We won’t substitute a generic paver or wall block - the color blends, dimensions, and surface texture won’t match, and you’ll see the patch forever. If your exact color lot isn’t available, we tell you upfront and work with you on options before we order anything.
Most paver re-leveling and re-sanding jobs take one to two days. A full paver patio or driveway installation typically runs three to five working days, weather permitting. Stonegate wall rebuilds depend on wall length and height - a 30-foot, three-foot-high wall usually takes our crew about a week, including excavation, drainage, block work, and cap-setting. Call (844) 638-7249 and we’ll give you a timeline specific to your project during the estimate.
We service and install the Tremron Havana Bay Paver line, the Rio Paver series, the Stonegate Retaining Wall system, and the Kingsford Fire Pit Kit. If you have a different Tremron product, call us - we can likely source it and our install methods transfer across their full hardscape catalog.
Tremron’s product warranty covers manufacturing defects in the block itself - cracking, spalling, color inconsistency from the factory. Our repair and installation work does not affect that product warranty. Our own work comes with our 730-Day Done Right Promise, so any installation-related issue is on us for two full years.
Pricing depends on the scope, but here’s what we typically see in the Fort Myers market for Tremron installations:
| Service | Typical Price Range (Fort Myers) |
|---|---|
| Paver Driveway Installation (Tremron) | $7,000 - $18,000 |
| Paver Patio Installation (Tremron) | $3,500 - $11,000 |
Those numbers include excavation, base prep, material, labor, and polymeric sand - we don’t add surprise change orders mid-job. Every estimate is line-itemed so you see exactly where your money goes. Call (844) 638-7249 to schedule a free estimate and we’ll give you a firm number for your specific property.
We can get very close - we pull samples against your existing pavers and order from the current production lot the distributor has in stock. Tremron’s Havana Bay line has a tumbled, variegated finish that blends well even if the lot numbers differ slightly. We’ll show you a sample against your existing hardscape before we install anything.
The fix is in the backfill and drainage. We excavate behind the wall, install at least 12 inches of clean #57 gravel, and - on walls over three feet - embed geogrid reinforcement tied into the block course. A perforated drain pipe at the base carries water out to daylight. Done right, the wall handles our saturation and dry cycles without moving.
The blocks themselves are fine structurally - the issue is cosmetic. Chlorinated water accelerates efflorescence and can dull the surface color over time. We recommend sealing the fire pit with a breathable siloxane sealer, which repels pool splash without trapping moisture inside the block. Don’t use a film-forming acrylic sealer for this application in our climate - it’ll peel and cloud.
Start with a high-quality polymeric sand, properly activated during installation. That means a controlled mist cure - not a quick hose-down - so the polymers set fully. After that, keep an eye on the joints after heavy weather. If you see washout starting, call us for a re-sand before the gaps widen and the pavers start chattering against each other under load. (844) 638-7249.
Book Your Tremron Service in Fort Myers, FL
If your Tremron pavers are settling, your wall is leaning, or you’re ready to put in a new driveway or patio built to handle Fort Myers’ soil and storms, call us at (844) 638-7249. We answer live, 24/7, and we’ll schedule a free on-site estimate with a written, upfront price. From paver patios to full retaining wall rebuilds and Tremron repair in Fort Myers, we do the work once and back it with our 730-Day Done Right Promise.
Written by Derek Hollenbeck, Owner at Groundwork Construction Co. of Fort Myers, serving Fort Myers and Lee County since 2014.