Jerith Construction in Naples, FL | Groundwork Construction Co. of Fort Myers
We provide independent Jerith aluminum fence installation, repair, and storm-damage restoration throughout Naples. We’re not a manufacturer-authorized dealer, and that matters here: our crews understand that the salt-laden Gulf air, the high water table, and the post-Ian flood-elevation mandates mean a Jerith fence in Naples needs different anchoring and corrosion protection than the same fence installed 30 miles inland. Call (844) 638-7249 for a free estimate on any Jerith project, from a single BreezeGuard pool-panel repair to a full Regency Estate perimeter on a new elevated home in Port Royal.
Why Naples Residents Choose Us for Jerith Service
Derek Hollenbeck grew up just north in the Iona area of Fort Myers and cut his teeth on construction fundamentals at Lorenzo Walker Technical College right here in Naples. He’s spent more than two decades building across Southwest Florida, and that local experience shows up in the way we approach every Jerith fence job. We know which welded intersections fail first on a surge-battered property because we’ve pulled apart enough salt-pitted picket joints on Gulf Shore Boulevard and Broad Avenue South to see the pattern before it spreads. We carry genuine Jerith extrusions and matching powder from Jerith’s Florida distribution network, so when you call us about a leaning panel or a corroded gate hinge, the repair looks like it belongs to the fence. Our technicians are background-checked, they show up in uniform, and every project falls under our 730-Day Done Right Promise. If it’s not done right, we make it right. No fine print.
Common Jerith Construction Problems We Solve in Naples
- Factory powder-coat corrosion at welded intersections. Within three to five years of installation near the Naples coast, salt-laden Gulf air eats through the factory powder coat right at the picket-to-rail welds. The exposed raw aluminum pits, the joint weakens, and eventually a wind gust snaps it. We see this most often on Regency Estate and Hatteras fences within a half-mile of the beach. Our repair strips the failed coating, treats the pitting with a corrosion-inhibiting primer, and applies our salt-rated marine coating, blended to match the original Jerith color.
- Post-anchor loosening from seasonal groundwater swings. Naples sits on a high water table, often 18 to 24 inches below grade. During wet season the ground swells; during dry season it contracts. Older Jerith posts set at the minimum 24-inch depth work themselves loose in that cycle, and you get leaning panels. We sleeve replacement posts into 30-inch concrete cores that reach deeper, drier sand, locking the fence line in place.
- Hurricane Ian debris damage to BreezeGuard pool fences. On properties backing up to open water or unprotected Gulf-access canals, Ian’s surge drove debris hard enough to bend BreezeGuard mesh panels and shear the self-tapping screws at the bottom tension wire. That failure mode is almost exclusive to Naples pool fences with direct exposure. We replace the damaged mesh sections and upgrade the bottom rail hardware to through-bolted 316-stainless fasteners.
- Gate sag on double-drive Regency Estate gates. The mucky fill common under post-Ian slab-on-grade approaches settles unevenly in Naples, throwing the hinge leaf out of alignment on heavy double-drive gates. We replace the entire hinge-bracket assembly rather than field-welding corroded tabs, because the heat from welding weakens the temper of the surrounding pickets.
- Post-cap wasp intrusion. Naples’ subtropical humidity and year-round warmth make Jerith post caps a prime nesting site for paper wasps. During installs we seal each cap with a UV-stable silicone bead that stops the nests without blocking the weep drainage the post needs.
Jerith Service in Naples: What Local Conditions Mean for Your Equipment
In Port Royal, the post-Ian rebuild cycle has created a construction problem that does not exist anywhere else in Florida. Owners are raising finished floor elevations to 14 feet NGVD to satisfy newly redrawn FEMA advisory base flood elevations, but in many cases the foundation footings were poured before Collier County issued the revised flood maps mid-project. For a Jerith perimeter fence, that means the original post holes are now below the new advisory BFE, and the fence line has to be re-anchored into the elevated slab’s perimeter beam. We install stem-wall extended post sleeves that tie directly into that beam’s rebar cage, bringing the fence anchor point up to the new structural plane without tearing out concrete that is already poured. This is not a generic fix. It is a detail we developed on a Broad Avenue South tear-down where the Regency Estate alley fence survived Ian’s surge but lost every third post at the bottom hinge welds to saltwater pitting. We pulled the damaged panels, sleeved replacement 6005-T5 posts into 30-inch concrete cores inside sonotubes that reached deeper dry sand, re-hung the original powder-matched pickets with 316-stainless hardware, and kept the homeowner’s insurance inspection on schedule without a full fence replacement. In Naples right now, that kind of problem solving is not optional. It’s the job.
Jerith Models & Products We Service in Naples
We service the full Jerith aluminum residential lineup: the Regency Estate series, the Hatteras series, the Coventry series, and the BreezeGuard pool fence. For most Naples repair work, we use genuine Jerith extrusions and factory-matched powder sourced through Jerith’s Florida distribution to keep the repair visually seamless. When a post-Ian occupancy deadline is bearing down and a specific Jerith extrusion is backordered, we substitute equivalent 6063-T6 architectural aluminum and apply our salt-rated marine coating, always disclosing the choice upfront. The result is a non-corroding repair that matches the existing fence profile and color. For gate repairs, we replace the full hinge-bracket assembly with new hardware rather than trying to weld corroded tabs back into service. We keep the common Jerith gate-hinge kits, post caps, tension-wire hardware, and touch-up powder on our trucks so a Naples call typically wraps up in a single visit.
Jerith Service Pricing in Naples
Every project gets a written line-item quote before we start, so the number you see is the number you pay. The final cost depends on the linear footage, the model, the post-anchoring method the soil requires, and whether we’re working on an existing fence or a new install on an elevated slab. Below are the ranges we typically see for Jerith-related work in Naples.
| Service | Price Range |
|---|---|
| Aluminum Fence Installation (Jerith Regency, Hatteras, Coventry) | $4,000 - $10,000 |
| Concrete Driveway Installation (including post-anchor integration) | $4,500 - $12,000 |
| Emergency & Storm Damage (Jerith fence repair) | $400 - $1,800 |
Emergency and storm-damage pricing covers the most common post-storm repairs we handle: replacing salt-pitted welded joints, re-anchoring leaning posts, straightening BreezeGuard mesh panels, and re-aligning gate hinge assemblies. A full section replacement or a new perimeter install on an elevated slab falls under the new-installation range. Every estimate is free and includes an on-site assessment. Call (844) 638-7249 to schedule yours.
Serving Naples, FL - Our Local Coverage Area
We’re based in the Naples area and know this community well, and we also provide Jerith repair in Bonita Springs. Use the map below to see our full service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Naples
It needs to meet the current Florida Building Code with Collier County amendments, not Miami-Dade NOA. The FBC Section 1620.2 governs impact-resistant coverings and structural wind-load requirements for fences in the High-Velocity Hurricane Zone that applies to coastal Naples. What catches owners off guard is the mid-project flood-map revision: if your finished floor elevation changed on the new FEMA advisory map after your footing was poured, the fence post anchoring has to be re-engineered to tie into the elevated slab. We check the advisory BFE for your parcel before any footing work starts.
Sometimes, yes. The mesh itself is typically salvageable unless it took a direct debris hit that tore the weave. The failure points are almost always the bottom-tension-wire fasteners (self-tapping screws that shear under surge load) and the post-base anchors, which corrode below grade where saltwater pooled after the surge receded. We replace the fasteners with through-bolted 316-stainless, treat the post bases with zinc-rich primer, and reuse the mesh panels if they pass a tension test. If the mesh failed, we replace the damaged sections with genuine Jerith BreezeGuard panels. Call (844) 638-7249 to have us inspect it. The estimate is free.
The culprit is the combination of high water table and the fill soil used under the gate posts. In the Vineyards area and similar Golf Club Drive communities, the soil beneath the slab-on-grade driveway approaches was compacted on what is essentially former wetland. Seasonal groundwater fluctuation causes micro-settlement that throws the gate leaf slightly out of alignment. The opener motor then works against increasing resistance until the circuit board burns out. We correct this by re-anchoring the gate posts into deeper concrete cores that bypass the unstable fill and by replacing the hinge-bracket assembly to bring the leaf back to dead plumb before installing the new opener. The fix is permanent if the post-anchor reaches stable soil.
Yes and yes. Naples has a long, warm wasp season, and Jerith post caps have an open underside that paper wasps treat like a pre-built condo. We seal each cap with a UV-stable silicone bead during install that closes the access gap but leaves the weep drainage open. For existing fences, we can clean out any active nests and apply the same seal. It is a small detail, but it stops a problem that drives plenty of Naples homeowners crazy every spring.
Yes. We do both concrete driveway work and Jerith fence repair under one crew and one scope, so you are not coordinating two contractors. The settled slab typically gets foam-jacking or mud-jacking to bring it back to grade, and then we extract the leaning post, re-anchor it into a deeper concrete core that bypasses the fill that caused the settlement, and re-hang the panel. The driveway and the fence get fixed in sequence so the post stays plumb on the corrected grade. You pay one written quote, and we do not subcontract either piece. Call (844) 638-7249 for an exact price. Estimates are free.
Service Areas Near Naples
We run Jerith service calls all over Collier and southern Lee counties, including Fort Myers, Lochmoor Waterway Estates, North Fort Myers, Pine Manor, Whiskey Creek, and Villas, and we also handle Jerith service in Lehigh Acres. Our crews stock Jerith parts on the truck, so a Naples call usually wraps the same day without a second trip for hardware.
If you are east of I-75 and need Jerith sales & service or are closer to Jerith service in Fort Myers, we cover that corridor daily. Our Naples service area extends down to Port Royal and over to Jerith service in Cape Coral for BreezeGuard pool-fence compliance work.
Book Your Jerith Service in Naples Today
If your Jerith fence took storm damage, has a leaning post, or needs a new install tied into an elevated slab, call (844) 638-7249. We answer with a live person, no voicemail. Estimates are free, and every Jerith project in Naples is covered by our 730-Day Done Right Promise. We don’t just break ground. We build something worth standing on.
Written by Derek Hollenbeck, Owner at Groundwork Construction Co. of Fort Myers, serving Naples since 2014.