Quikrete Driveway & Pavers: The Fort Myers Owner’s Guide
When a Quikrete driveway or paver installation starts failing in Fort Myers, the culprit is almost never the concrete itself. We find it’s the base - the compacted soil and gravel underneath - that our high water table and sandy soil have slowly undermined. A full paver driveway install in Fort Myers runs $7,000 to $18,000, and most homeowners call us after spotting a low spot where water pools after a summer thunderstorm. That puddle is your driveway telling you the sub-base has shifted, and no amount of spot-fixing the surface will stop it from coming back.
Groundwork Construction Co. of Fort Myers is an independent contractor - we’re not affiliated with Quikrete, but we install and work with their paver and concrete products every week across Lee County. Derek Hollenbeck started this company after spending years watching other crews cut corners on base prep, which is the one step that determines whether your driveway survives five hurricane seasons or sinks after two. We stock the right polymeric sand, edge restraints, and base aggregates that Quikrete paver systems need to hold up in Southwest Florida, and we carry a 730-Day Done Right Promise on every job - if the pavers shift because our base work was wrong, we make it right at no charge.
Which Quikrete Models This Applies To
Quikrete’s paver and concrete product line breaks into three buckets for driveway use: their pre-mixed concrete bags (the standard gray 80lb sacks you see at any supply house), their polymeric sand and jointing compounds, and their concrete resurfacer products. The resurfacer - Quikrete Concrete Resurfacer - is the one we get the most questions about, because it’s marketed as a driveway-saver. It bonds to existing concrete at about 1/16 to 1/4 inch thick, but only if the slab underneath is structurally sound. If your Fort Myers driveway has cracks wider than 1/4 inch, deep spalling, or sunken sections, resurfacer is a temporary cosmetic fix - it won’t stop the sinking, just hides it for six months until the cracks telegraph through.
For paver driveways, Quikrete’s PowerLoc Jointing Sand is the go-to - it hardens after water activation and resists ants and washout better than standard sand. The gotcha in Fort Myers: PowerLoc needs a completely dry paver surface before you sweep it in, or it’ll haze and never fully cure. During our rainy season from June through September, that’s a narrow window. We prefer their Premium Play Sand for paver bedding when the base is properly graded, but most DIY jobs we see use whatever bagged sand is cheapest, and that’s where the shifting starts.
Signs Your Quikrete Driveway or Pavers Are Failing
- Standing water that hangs around for hours. A properly graded driveway should sheet water off within minutes. Puddles that linger mean the base has sunk and created a bowl - water’s finding the low spot, then working its way under the pavers and accelerating the problem.
- Pavers that rock when you step on them. This is a base-compaction failure. One loose paver is annoying. More than three in a row means the sub-base wasn’t tamped in lifts, and the whole field is likely drifting. In Fort Myers, sandy soil compacts fine initially but can wash out from underneath if edge restraints aren’t buried deep enough.
- Polymeric sand that turns to powder. Quikrete PowerLoc should cure hard - if it’s crumbling out of the joints, it either got wet during application or the pavers are moving too much for any jointing compound to hold. Ant mounds in the joints are the telltale sign.
- Concrete resurfacer peeling in sheets. This is almost always a bonding failure: the old slab was too smooth, too dirty, or too damp when the resurfacer went on. Florida humidity makes this worse - the slab can feel dry but still be wicking moisture from underneath. We acid-etch or grind every slab before resurfacing, which is a step weekend DIYers routinely skip.
- Edge pavers sliding outward. Without a buried concrete or heavy-duty plastic edge restraint, the outside row of a paver driveway will spread under vehicle weight. You’ll see a widening gap along the lawn border. Once the edge goes, the rest of the field loses tension and follows.
Replacement Cost & What’s Included
For a paver driveway, Fort Myers installs with proper base prep run $7,000 to $18,000 depending on square footage. A concrete driveway using Quikrete bagged mix runs $4,500 to $12,000 installed. The base work is 60% of the cost - excavation, compaction, gravel base in 4-inch lifts - and it’s the line item where cheap bids get dangerous. We include full excavation down to stable soil (usually 8-10 inches in Fort Myers), a geotextile fabric to stop sand migration, compacted limestone base, screeded bedding sand, and polymeric jointing sand on every paver job. Edge restraints and a final plate-compactor pass are standard, not extras.
Every Groundwork job comes with upfront pricing - the number in your written estimate is the number you pay, no change orders because we hit a root or needed extra sand. If the scope changes, we re-quote before we touch anything. You’ll also get our 730-Day Done Right Promise: if the pavers shift, sink, or the joints fail within two years, we fix it. You call (844) 638-7249, a live person answers - 24/7, not a voicemail - and we schedule the return.
DIY or Call Us?
A homeowner who’s handy can handle re-sanding joints with Quikrete PowerLoc, provided they get the pavers bone-dry and follow the water-activation steps exactly. You can also float out small concrete spalls with Quikrete Vinyl Concrete Patcher if the cracks are stable and you prep the surface right. These are weekend projects that cost under $200 in materials.
Full paver re-leveling, base rebuilds, and concrete resurfacing over a moving slab are not DIY- friendly. The equipment alone - a plate compactor, a concrete grinder, enough bulk gravel delivered - pushes you past the cost of having us do it correctly the first time. And re-compacting a failed base without fixing the drainage that caused it just wastes your Saturday. We see it a few times a year in Fort Myers: someone rents a compactor, re-sets the pavers, and six months later the same low spot is back. They end up calling us anyway, but now they’re out the rental and the weekend. We don’t just break ground - we build something worth standing on. Call (844) 638-7249 for a free estimate, and we’ll give you a straight answer, even if the answer is “it’s not as bad as you think.”
FAQs
A professionally installed paver driveway on a compacted base should last 25 to 30 years before needing significant re-leveling, even with Fort Myers’ rain and sandy soil. The pavers themselves will hold their color and structure for decades; it’s the base that determines lifespan, not the Quikrete product.
Yes, isolated low spots can be lifted, re-based, and re-set without touching the rest of the field - if the edge restraints are intact and the surrounding pavers are still tight. If the sinking is widespread or the edges are drifting, a full re-level is the only fix that won’t fail again. Call (844) 638-7249 and we’ll assess yours honestly.
Most residential paver driveways in Fort Myers take our crew 3 to 5 working days from tear-out to final compaction, weather permitting. We don’t rush the base cure or the polymeric sand activation - those steps can’t be shortcut without costing you longevity.
We stock PowerLoc sand, bedding sand, base gravel, edge restraints, and concrete patching products as standard truck stock. Specific paver styles and colors are ordered per job from our local suppliers - we’ll match your existing pavers by manufacturer, style, and color batch to keep the driveway looking uniform.
Written by Derek Hollenbeck, Owner & General Contractor, Groundwork Construction Co. of Fort Myers, serving Fort Myers and nearby areas.