Andersen Kitchen Remodeling Nationwide

Andersen Kitchen Remodeling: The Fort Myers Owner’s Guide

If you have an Andersen kitchen in Fort Myers and something’s not right, you need straight answers, not a sales pitch. A full Andersen kitchen remodel with Groundwork Construction Co. of Fort Myers typically runs $14,000 to $45,000, depending on cabinet count, island configuration, and whether countertops and backsplash are part of the job. Most homeowners call us because they notice cabinet doors that won’t close square, drawer glides that grind or stick, or finish peeling near the dishwasher and sink base, all of which we correct during the remodel while matching your existing Andersen profile so the new work doesn’t look patched in.

Call (844) 638-7249

We carry Andersen-compatible parts on our trucks across Lee County, and we’re one of the few contractors in Fort Myers who can match Andersen’s 200 Series and 400 Series trim profiles without making the kitchen look like two different jobs were done at two different times. Call (844) 638-7249 for a free estimate: we answer live, day or night.

Which Andersen Models This Applies To

Andersen kitchen cabinetry and millwork in Fort Myers homes generally falls into one of three buckets: Andersen 200 Series, 400 Series, or the newer E-Series / Eagle aluminum-clad products that some builders used for integrated kitchen bump-outs and pantry enclosures. Identifying what you have is simpler than most homeowners think. Open a cabinet door and look at the hinge cup or the bottom edge of the drawer box. Andersen stamps a four-digit production code, not always easy to spot but typically laser-etched rather than ink-printed. If you can’t find it, measure the drawer front thickness: 200 Series uses a 3/4-inch solid-wood front with a distinct Shaker profile, while 400 Series fronts are slightly thinner at 5/8 inch and use a deeper cove detail around the panel.

On the OEM-versus-aftermarket question, here’s the honest answer for Fort Myers: Andersen’s factory finish is catalyzed and baked, which matters in our humidity. We’ve seen aftermarket color-matched paints flash and peel within two wet seasons when they aren’t applied over the same primer system Andersen uses. We stock Andersen OEM drawer glides, hinge sets, and trim profiles. For door fronts and drawer boxes, we order direct from Andersen’s millwork division to guarantee the profile matches. Groundwork Construction Co. of Fort Myers is an independent service provider and not affiliated with Andersen Corporation.

Signs Your Andersen Kitchen Is Failing

• Drawer glides that grind or catch halfway. Andersen’s undermount glides collect fine grit over time, and in Fort Myers the airborne sand and salt accelerate that wear. What starts as a rough slide turns into a glide that seizes because the bearing cage has cracked internally and the ball bearings are no longer tracking.
• Cabinet doors that won’t stay square or rub the frame. This is almost always hinge sag, not the door itself. Andersen uses a specific cup-hinge spec; aftermarket hinges don’t reset the reveal the same way, and we’ve corrected kitchens where a handyman swap made three adjacent doors look mismatched by an eighth of an inch.
• Finish blistering or peeling at the bottom rail of sink-base cabinets. Even a slow drip under the sink wicks into the wood fiber. Andersen’s finish is durable but not waterproof, and once moisture gets behind the catalyzed topcoat, the only permanent fix is replacing the affected door or drawer front and sealing the raw edges before installation.
• Soft-close mechanisms that slam instead of slow. The piston inside the damper loses fluid over time. You can test this by removing a drawer and pressing the mechanism with your thumb; if it collapses with no resistance, the damper’s done and won’t recover.
• Island kickplates or end panels separating from the floor. This is a Fort Myers-specific issue we see regularly in homes built on slab. Minor slab settlement plus seasonal humidity swings work the base moulding loose. Andersen’s clip system on the 400 Series makes this less common, but the 200 Series kickplate runs rely on adhesive beads that eventually fail.

Replacement Cost & What’s Included

A full Andersen kitchen remodel with Groundwork Construction Co. of Fort Myers runs $14,000 to $45,000. That range reflects what’s actually being replaced: a smaller galley kitchen with 12 to 14 cabinet openings, laminate counters, and no island lands closer to $14,000, while a larger open-plan kitchen with a six-foot island, Cambria or Silestone countertops, full-height backsplash, and 22 or more cabinet openings pushes toward the upper end. We write a line-item quote so you see exactly where the money goes: cabinet components, countertop fabrication and install, backsplash tile and setting materials, hardware, and labor. No change-order games. No “we found something” upcharges halfway through.

Every Andersen kitchen remodel we do in Fort Myers is covered by our 730-Day Done Right Promise. If something isn’t right two years later, we make it right, period. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which makes a substantial remodel accessible without gutting your savings.

DIY or Call Us?

There are things a homeowner can safely check, and things that get expensive fast when tackled without the right tools and parts. You can tighten hinge screws, adjust a cabinet door’s reveal using the cam screw on the hinge cup, and reattach a loose kickplate with construction adhesive and a few pin nails. Those are safe. What isn’t safe is trying to replace an undermount drawer glide on a fully loaded 36-inch drawer stack without disassembling the drawer box correctly. Andersen drawer boxes are joined with dovetail locking joints and a specific bottom-panel fit; prying one apart wrong cracks the joint, and you’re now buying a new drawer box instead of a glide.

The larger risk is a cosmetic mismatch that lowers your home’s resale value. Fort Myers buyers recognize Andersen quality, and they also notice when one section of the kitchen doesn’t match. We bring the exact profile, factory finish, and install it so the new work blends seamlessly with what’s staying. Call (844) 638-7249 and we’ll send a background-checked, uniformed technician to your home for a free estimate, no obligation whatsoever.

FAQs