Why Fort Myers Homeowners Choose Andersen Construction
We provide independent Andersen window and door construction, repair, and replacement service across Fort Myers and Lee County, including Andersen repair in Fort Myers. When an Andersen 400 Series double-hung slams shut from a corroded balance spring or a 200 Series patio door fogs up during a humid July week, we know exactly what failed, why it failed in this coastal climate, and whether a repair makes more sense than a full replacement. We are not an Andersen-authorized dealer or warranty center, but we have built our name on honest diagnostics and OEM-spec repairs that keep your Andersen products performing. For a free estimate on any Andersen project in Fort Myers, call (844) 638-7249.
Why Trust Groundwork Construction Co. of Fort Myers for Your Andersen Construction?
Andersen builds a precision product, and precision products demand a crew that understands what they are looking at. Our technicians work on Andersen windows and doors weekly across Fort Myers, from the McGregor corridor’s 1960s concrete block homes to newer post-2002 code builds in master-planned communities, and we also provide Cape Coral Andersen service. Derek Hollenbeck, our owner and a Lorenzo Walker Technical College grad who grew up in Iona, has been running crews in Lee County for over two decades and insists that every Andersen job gets the same standard: diagnose the root cause first, use genuine Andersen OEM parts, and never sell a replacement when a repair is the right call.
We carry OEM Andersen balance mechanisms, rollers, tilt latches, and weatherstripping in our local stock so we are not waiting on a warehouse shipment while your window sits inoperable. Every technician who shows up at your door is background-checked and in uniform, and every project we complete is covered by our 730-Day Done Right Promise. If something is not right, we make it right. That guarantee, backed in writing, is one of the longest you will find in residential construction in Southwest Florida.
Common Andersen Construction Problems We Fix in Fort Myers
Andersen products are well-engineered, but Fort Myers throws a specific set of conditions at them: salt air, sustained UV, wind-driven rain, and humidity that rarely dips below 70%. We also see these same stressors on Andersen service in Lehigh Acres calls. Here are the issues we see most often on service calls across Lee County:
- 400 Series Woodwright Double-Hung sash counterbalance failures. The constant-force coil balance springs inside the side jambs corrode and snap after years of salt-air intrusion. The window slams shut or refuses to stay open, and homeowners assume they need a full replacement. We pull the sashes, extract the snapped springs, clean the tracks, and install new OEM balances. Most calls on these are a repair, not a replacement.
- E-Series aluminum-clad casement sashes warping and delaminating. When the original factory finish breaks down under relentless Florida sun, moisture gets behind the aluminum cladding and separates it from the wood sash. We see this on south-facing and west-facing elevations the most. Depending on the extent of the rot, we either replace the sash unit or guide you to a current Andersen impact-rated E-Series that holds up better against UV.
- 200 Series Narroline gliding patio doors with fogged insulated glass units. Failed perimeter seals let Fort Myers humidity into the airspace between the panes, and you get a permanent haze that no amount of cleaning will fix. We replace the IG unit with a new Andersen OEM sealed unit and inspect the frame for any track damage that contributed to seal stress.
- A-Series Frenchwood hinged patio door weatherstripping that has compressed flat. When the bulb seal on the bottom sweep loses its shape after a few summers, summer downpours and wind-driven rain find their way inside. We replace the weatherstripping with Andersen OEM profiles and check the door’s reveal and alignment so the new seal actually seals.
- Impact window installation done wrong by out-of-state crews post-Ian. After Hurricane Ian, Fort Myers got flooded with unlicensed contractors who installed Andersen impact windows without proper anchoring or flashing. We have corrected dozens of these jobs: re-anchoring frames to meet Florida Building Code wind-load requirements and re-flashing openings so water stops migrating into the wall cavity.
Andersen Parts & Our Repair-vs-Replace Approach
We use genuine Andersen OEM replacement parts exclusively. Balance mechanisms, sash locks, tilt latches, rollers, weatherstripping, and insulated glass units all come through our independent supply chain. Andersen components are engineered to tight tolerances, and aftermarket alternatives rarely fit correctly or last in Fort Myers conditions. A generic balance spring might hold tension for a season, but it will fail again under daily use in salty air long before an OEM coil would.
We recommend replacement over repair when the frame has extensive rot beyond the sill, when the window is a 20-plus-year-old design with discontinued hardware that we cannot source reliably, or when the existing unit does not meet current wind-borne debris code requirements and a repair would leave you non-compliant. If replacement is the smarter long-term move, we will walk you through the Andersen lines that match your home and budget, and you will get upfront pricing with no surprises. Call (844) 638-7249 and we can talk through whether your window is a candidate for repair or needs a full swap.
Our Andersen Service Process - Step by Step
- 1
Diagnosis on site. We inspect the unit in place, testing operation, checking for air and water infiltration, and identifying whether the issue is in the sash, frame, balance system, glass unit, or weatherstripping. On 400 Series double-hungs, we pull the sashes to examine the spring coils directly. On casements, we check the operator mechanism and the integrity of the cladding-to-wood bond. The diagnostic is free with your estimate.
- 2
Straightforward estimate. We give you the numbers: repair with OEM parts if feasible, or a replacement quote with the Andersen product line that fits the opening and meets Fort Myers wind-load requirements. No up charges after the fact. You see the number before you decide.
- 3
Repair or installation. Our crew arrives with the parts or the new Andersen units. For replacements, we pull the old window or door, inspect the rough opening for hidden water damage, flash the opening with proper tape and sealant, set the new unit, and anchor it to Florida Building Code specs. We re-cap exterior trim with custom-bent aluminum where needed to prevent moisture entry.
- 4
Operational test and weather seal check. We run the window or door through its full range of motion, check reveals, and test the seal. If we installed impact-rated units, we verify the anchoring pattern matches the product approval documentation Lee County requires.
- 5
Warranty walkthrough. Before we leave, we explain what is covered under our 730-Day Done Right Promise and what falls under Andersen’s manufacturer warranty on the components. You get it in writing. The job site is cleaner than we found it.
Andersen Products We Service & Install in Fort Myers
We work on the full Andersen product line that you will find in Fort Myers homes. That includes the 400 Series Woodwright double-hung and casement windows, the 200 Series Narroline gliding patio doors and double-hungs, the E-Series aluminum-clad casements and awnings, and the A-Series Frenchwood hinged and gliding patio doors. We also install new Andersen impact-rated windows and doors that meet Florida Building Code wind-borne debris requirements for the Wind-Borne Debris Region Fort Myers sits in. Our local stock includes OEM balances, rollers, weatherstripping profiles, tilt latches, and IG unit order forms so we can move quickly on the most common repairs.
Our crew recently pulled up to a 1990s Fort Myers home where three second-floor 400 Series Woodwright double-hungs had become nearly impossible to operate. We pulled the sashes and found the constant-force balance springs had corroded and snapped from years of salt air intrusion, jamming the side jambs. After cleaning out the tracks, we installed new OEM coil balances and replaced the worn tilt latches, then re-capped the exterior brickmould with custom-bent aluminum flashing to stop further moisture entry. The homeowner had their cross-breeze back, all three windows operating smoothly with one hand.
We Also Service These Brands
Andersen is a big part of what we do, but it is not the only brand we work with. We also handle KraftMaid and Kohler on the interior side, and Cambria and Silestone for countertops and surfaces, across kitchen remodels, bathroom renovations, and whole-home projects in Fort Myers. Being multi-brand means we give you an honest comparison when a project calls for it, not a sales pitch for the one brand we carry.
Andersen Construction Pricing in Fort Myers
These ranges reflect our typical Fort Myers market pricing for Andersen-related work. Impact window installations run higher because the units themselves cost more and the installation requires code-compliant anchoring and product approval documentation. Every project gets a written, line-item estimate before we start, and the number you see is the number you pay.
| Andersen Service | Typical Fort Myers Price Range |
|---|---|
| Window Replacement | $4,500 - $15,000 |
| Impact Window Installation | $8,000 - $25,000 |
| Roof Replacement | $8,000 - $20,000 |
FAQs - Andersen Construction Service in Fort Myers
No, we are an independent Andersen service provider. We are not an Andersen-authorized dealer, installer, or warranty center. That said, we use genuine Andersen OEM parts exclusively and our technicians have years of hands-on experience with the full product line in Fort Myers conditions. We do not cut corners on components or methods, but we also do not represent ourselves as a manufacturer-backed service operation.
Genuine Andersen OEM parts only. We have found over two decades in Lee County that aftermarket balances, rollers, and weatherstripping do not hold up in our salt air and humidity, and the fit is rarely precise. We source OEM components through our independent supply chain and keep the most common items in local stock. For the best long-term performance in Fort Myers, OEM is the only option we will stand behind.
The constant-force coil balance springs inside the side jambs have likely corroded and snapped. This is the most common 400 Series issue we see in Fort Myers. Salt air works its way into the jamb pocket over years of coastal exposure, and the steel springs eventually fail. The window suddenly has no counterbalance and gravity takes over. This is repairable. We pull the sashes, remove the broken spring coils, clean the tracks, and install new OEM balances. Most jobs are done the same day. Call (844) 638-7249 and we can schedule a diagnostic.
Yes, in most cases. The haze is a failed insulated glass unit, where the perimeter seal has broken and Fort Myers humidity has entered the airspace between the panes. We can replace just the IG unit with a new Andersen OEM sealed unit without replacing the entire window frame or sash, provided the sash itself is structurally sound. If the aluminum cladding has delaminated from the wood sash at the same time, we will let you know whether a sash replacement is the better move. Either way, you are not automatically looking at a full window replacement. Call (844) 638-7249 for an inspection.
Depends on how far the rot extends. If it is confined to the bottom rail of the door panel and the sill, we can often replace those components and re-seal the unit. If rot has spread into the side jambs or the sub-sill framing, a full replacement starts to make more financial sense, and we would guide you to a current Andersen Frenchwood or A-Series hinged door that meets Fort Myers wind-load requirements. For homeowners needing Andersen repair in Bonita Springs, we apply the same evaluation standard. We will not sell a replacement when a repair will do the job, but we also will not patch rot that will spread in six months. Call (844) 638-7249 and we will give you an honest assessment.
Repairs like a balance spring replacement or weatherstripping swap typically fall in the lower hundreds, while a full window replacement ranges from $4,500 to $15,000 depending on the number of openings and the Andersen product line. Impact window installations run $8,000 to $25,000 because the units are more expensive and the installation requires code-compliant anchoring. Those are real Fort Myers numbers, not national averages. We provide a written, line-item estimate before any work begins. Call (844) 638-7249 to schedule your free estimate.
Book Your Andersen Service in Fort Myers, FL
If your Andersen windows or doors are not operating the way they should, call us at (844) 638-7249. We answer with a live person, 24/7. We will schedule a diagnostic, give you a straight answer on repair versus replace, and stand behind the work with our 730-Day Done Right Promise. From a fogged patio door to a full impact window retrofit, we have the Andersen experience to do it right the first time.
Written by Derek Hollenbeck, Owner & General Contractor at Groundwork Construction Co. of Fort Myers, serving Fort Myers since 2014.