Custom Windows & Doors in Lehigh Acres - Free Measure, Exact Written Quote

Custom windows and doors in Lehigh Acres typically run from $8,000 to $25,000, shaped almost entirely by the opening count, material choices, and what the existing rough openings reveal once we open the wall

That range covers most custom window and door projects we deliver across Lehigh Acres, FL, from a handful of retrofit openings on a 1970s concrete block ranch to a full architectural door-wall package on a new-construction legacy-lot build. What matters more than the number is the discovery process. Every custom job starts with a free on-site estimate where Derek Hollenbeck and our crew measure, inspect for moisture or framing compromise, and walk you through the exact options that make sense for your specific home. Call (844) 638-7249 and we will come out within days, not weeks, to give you a written line-item quote that locks in the materials, the labor, and the schedule before any work begins. No vague bids, no change-order surprises, no leaving you to figure out which product grade actually holds up to a Lehigh Acres rainy season.

Call (844) 638-7249

How we build custom windows and doors, start to finish

Most Windows & Doors services in Lehigh Acres follow the same five-stage sequence, whether we are swapping out a single rotted bay window or opening up the entire back wall of a 2005 boom-era CBS home. The timeline runs three to six weeks from permit approval to final walkthrough, depending on the number of openings and whether we encounter hidden water damage behind the old frames. Here is how it works.

Stage one: the site measure and wall inspection. We come to your home, laser-measure every opening, and check for the failure patterns that Lehigh Acres homes accumulate over decades of summer humidity and driving rain. On older block homes, we look specifically for rusted lintels and softened jambs where moisture wicked into the rough opening. On 2000s tract homes, we check for OSB swelling and truss uplift that throws window squares out of plane. This inspection takes about an hour and tells us whether we are doing a clean swap or need to budget for framing repair before the custom units arrive. You will decide nothing at this stage except whether to move forward.

Stage two: material and configuration selections. After measurements are locked, we walk you through your options: frame material (vinyl, fiberglass, wood-clad, or aluminum), glass package (low-E, tint, impact-rated versus non-impact), grid pattern, hardware finish, and operating style. For doors, you will choose swing direction, threshold type, sidelight configuration, and lock set. This is the most decision-heavy phase, and we guide it by showing you exactly what holds up in Lee County’s climate, not just what the catalog offers. You will make every selection here, and those selections set the final price. This meeting usually runs 45 minutes to an hour.

Stage three: permitting and ordering. We pull the permit with Lee County Building & Permitting. Because custom windows and doors often change the building envelope, the plans review typically checks for wind-load compliance and, where the project widens an opening, structural header calculations. Permitting in Lehigh Acres moves on a two-to-four-week timeline depending on county volume. We order your custom units the same day the permit is submitted; most custom-manufactured windows and doors ship from the factory in three to six weeks. You will not need to do anything during this phase except approve the permit set if the county issues comments. We handle every back-and-forth.

Stage four: demolition and rough-opening prep. When the permit is approved and the units are in our warehouse, we schedule demolition. The crew arrives in uniform, removes the old windows and doors, and immediately inspects the exposed rough openings. If we find rot, rust, or termite damage - common in Lehigh Acres homes where irrigation spray hits the sill over and over - we repair the framing, flash the opening with self-adhered membrane, and prep the sill pan before the new unit goes in. For urgent post-storm situations, see our Emergency & Storm Damage service in Lehigh Acres. Demolition and prep on a typical four-to-six-opening job takes one day. Larger projects with structural changes (widening an opening for a door-wall or adding new lintels) can take two to three days.

Stage five: installation, trim, and seal. We set each custom unit, shim it square, anchor it to the opening per the manufacturer’s engineered requirements, and seal the perimeter with backer rod and a high-grade exterior sealant that holds up to Florida UV and monsoon rain. Interior trim goes in next, caulked and nail-set, ready for paint if you are handling that yourself or we can coordinate a painter. The crew walks the jobsite at the end of every day, and Derek does a final walkthrough with you to make sure every window operates smoothly and every door swings, locks, and seals correctly. The 730-Day Done Right Promise covers every inch of this work.

The options you will choose between

Custom windows and doors break down into a handful of real decisions. We carry a curated set of brands - including Andersen and Marvin - because we have installed enough units in Lehigh Acres to know which manufacturers handle the humidity, the afternoon thunderstorms, and the code-cycle wind requirements without turning into a call-back headache. Here are the choices that matter.

• Frame material. Vinyl is the most cost-effective and performs well in southwest Florida - it will not rot, it handles thermal expansion without binding, and it comes in a range of colors. Fiberglass costs more per opening but moves at nearly the same rate as the glass itself, which means fewer seal failures over a 20-year window. Wood-clad gives you a natural interior look but demands more diligence on exterior flashing and finish maintenance in a climate where afternoon rain can soak an east-facing wall every day for months. Aluminum is a specialty choice we recommend only for specific architectural contexts, and we almost always spec it with a thermal break.
• Glass package. In Lehigh Acres, low-E is not optional - it cuts solar heat gain, keeps your AC bill from running away, and protects interior finishes from UV fade. You will choose between standard low-E, a tint upgrade for west-facing walls that get blasted by afternoon sun, and impact-rated glass if your home sits in the wind-borne debris zone or if you simply want the year-round security and noise reduction that laminated glass delivers. Impact-rated custom windows and doors cost more up front but lower your homeowner’s insurance premium and eliminate the seasonal hassle of shutters.
• Operating style. Single-hung, double-hung, casement, awning, picture, and architectural shapes all have different cost and function trade-offs. We spec casements and awnings where you want maximum cross-ventilation and a tighter air seal when closed. Double-hungs dominate in Lehigh Acres because they are familiar, easy to clean, and work well with standard opening sizes on CBS homes. Fixed picture windows and transoms let you bring in light without introducing an operable unit on a hard-to-reach wall.
• Door configuration. For custom doors, you will pick the slab style, the glass lite pattern, whether you want sidelights or a transom, the threshold material, and the hardware finish. French doors, sliding patio doors, and multi-slide door-walls each solve different space and access problems. We walk you through what works for your wall layout and how you actually use the room - there is no reason to pay for a multi-slide system if a single inswing door plus a fixed sidelight accomplishes the same flow to the patio.

What custom windows and doors cost in Lehigh Acres, FL

A custom window and door project in Lehigh Acres typically lands between $8,000 and $25,000. The low end covers a handful of retrofitted vinyl double-hungs with standard low-E glass, no structural changes, and easy-access openings on a single-story CBS home built in the last 20 years. The high end reflects a full package of impact-rated fiberglass or wood-clad custom units, a multi-panel door-wall, and structural work to widen openings on an older home where we find framing damage during demolition.

Several specific factors move the number. The number of openings is the obvious one - each custom unit carries its own material cost, labor, and trim. Frame material adds roughly 30 to 60 percent to the per-opening price when you move from vinyl to fiberglass or wood-clad. Impact-rated glass adds a per-opening premium that varies by size and design pressure rating. Structural header work, especially widening a window into a door or adding a new lintel above a larger opening, adds engineering time, county plan review scope, and an extra day or two of framing labor. Finally, the condition of the existing rough openings matters enormously - a rusted-out steel lintel on a 1960s block home needs to be replaced before the new unit goes in, and that cost shows up in the estimate once we open the wall and confirm the damage.

Every quote we write in Lehigh Acres is a line-item, fixed-price document. It includes the custom units themselves, all fasteners and flashing, demolition and disposal of the old windows and doors, rough-carpentry repair up to a specified scope, installation, interior trim, and exterior sealing. The quote tells you exactly what is not included - typically interior paint, stucco repair beyond the immediate window perimeter, and any permit expediting fees if Lee County requires additional structural review. You will see the number before you sign, and that is the number you pay.

What Lehigh Acres homes specifically do to this job

The housing stock in Lehigh Acres throws two distinct sets of conditions at a custom window and door project, and they have almost nothing in common with what we see on a Cape Coral canal home or a Fort Myers riverfront property. On the original 1960s and 1970s concrete block homes concentrated near the older platted sections around Joel and Leeland Heights Boulevard, we routinely open walls to find corroded steel lintels, dry-rotted wood bucks set directly into the block, and rough openings that have drifted out of square over 50 years of slab settlement on flat pine flatwoods soil. These homes were built in the first retirement-market wave, and the fenestration was never designed for modern wind loads. Every custom window we install here gets a new engineered lintel where needed, a fully flashed and sealed rough opening, and a unit rated for the current Florida Building Code wind zone - which is a different standard than what was in place when these homes went up.

The second wave - the 2003-to-2008 tract CBS homes that surged across neighborhoods like Greenbriar and Westminster - presents a different problem. Many of these homes went through foreclosure during the downturn and sat with deferred maintenance for years. We find swollen OSB sheathing around window openings where builder-grade flashing failed early and let rain wick in, and we see original aluminum single-pane windows with failed seals and pitted frames that were never upgraded when the home changed hands. On these properties, a custom window and door package often becomes part of a broader envelope upgrade - homeowners sometimes pair it with windows and doors in Lehigh Acres that address the whole home at once, or with concrete driveways and concrete work in Lehigh Acres when the front approach needs attention at the same time.

Permitting is handled through Lee County, and the plans examiner will want to see wind-load calculations and product approvals for every custom unit. On legacy-lot new construction, where a builder pulls a permit for a lot platted in the 1950s that has sat vacant since the Kennedy administration, the pre-permit coordination with Lee County Public Works on access and utility stub locations can add several weeks to the front end of the project - a reality that simply does not exist in neighboring cities with more contiguous development. We navigate every step of that process so you do not have to.

Frequently asked - custom windows and doors in Lehigh Acres

Your custom windows and doors estimate in Lehigh Acres

We start every project with a free, no-pressure on-site estimate. Derek or a senior crew lead comes to your home in Lehigh Acres, measures every opening, inspects the existing frames and surrounding wall condition, and walks you through exactly what your options cost. You get a written line-item quote, a project schedule, and straight answers to every question - including whether the work makes more sense as a standalone project or as part of a larger home upgrade. Some homeowners combine custom windows and doors with paver driveways in Lehigh Acres when they are pulling the trigger on a full exterior refresh. Whatever your scope, call (844) 638-7249 to schedule the walkthrough. A live person answers, 24/7, and we will have a uniformed, background-checked technician at your home within days. The 730-Day Done Right Promise backs every window we hang and every door we hang. You have our word, in writing.

Written by Derek Hollenbeck, Owner at Groundwork Construction Co., serving Lehigh Acres and greater Lee County with custom windows and doors built to handle Florida, backed by a promise you can hold us to.