Full Kitchen Remodeling in Arcadia - One Written Price, No Change Orders

What a Full Kitchen Remodel in Arcadia Actually Costs and What the Job Entails

A full kitchen remodel in Arcadia, FL typically runs $14,000 to $45,000 and takes 6 to 10 weeks from demolition to final walkthrough. The price covers everything: tearing out the old kitchen, relocating plumbing or electrical where the layout changes, new drywall and flooring, custom or semi-custom cabinetry, countertops, backsplash, appliances, lighting, and finish trim. That’s the honest range we quote homeowners here in DeSoto County. If you’re ready to price your project, call us at (844) 638-7249 for a free, no-hassle estimate and we’ll give you a written number you can plan around.

How We Stage a Full Kitchen Remodel in Arcadia From Start to Finish

Most homeowners haven’t lived through a full gut remodel before, so we walk through exactly what happens and when. Here’s the real sequence, with the timelines we’ve seen across dozens of Arcadia jobs. The rhythm matters, because you’re living without a kitchen for a stretch and need to know what’s coming.

Stage 1: Demolition and Discovery (Days 1-3)

We contain the work area with dust barriers, shut off utilities to the kitchen, and strip everything back to the studs and subfloor. Flooring, cabinets, countertops, drywall, old plumbing stub-outs, and electrical come out. This is also when we do the most important thing: look inside the walls. In Arcadia homes built or patched after Hurricane Charley, we routinely uncover framing repairs that were never permitted, undersized headers where walls were moved by storm-chaser crews, or moisture in the sill plate from the Peace River’s high water table. Finding it now means fixing it before it’s buried behind new tile. Demolition usually wraps by the end of day three.

Stage 2: Rough-In and Structural Corrections (Days 4-12)

With the room open, we move plumbing supply and drain lines if you’re relocating the sink, dishwasher, or adding a pot filler. We run new circuits for appliances, under-cabinet lighting, island outlets, and the range hood. This is your window to add recessed lighting, move a switch, or bring outlets up to code, including GFCI protection where needed. If we found framing issues during demo, we sister new studs, replace damaged bottom plates, and strap the wall-to-foundation connection per current wind-mitigation standards. An inspector visits at the end of this stage before any walls are closed. We handle the permit and coordinate the inspection so you don’t have to chase it down.

Stage 3: Drywall, Flooring, and Wall Finishing (Days 13-20)

We hang, tape, and finish the drywall, prime the new walls, and lay the finished floor if it’s tile or plank flooring that runs under the cabinets. This is when the room starts looking like a room again. Paint goes on the walls and ceiling once the drywall dust settles. If you’re doing a tile backsplash, we wait until the countertops are in. But the foundation finishes, things you don’t want to disturb later, happen now.

Stage 4: Cabinet, Countertop, and Trim Installation (Days 21-35)

Cabinetry goes in first, dead-level on the new floor. This is the longest single phase, especially with custom or semi-custom cabinets that ship on a 3-to-4-week lead time after templating. Once the base cabinets are locked down, we template for countertops, which adds a few days while the slab is cut and polished. After countertops are set, we install the sink, faucet, and the backsplash tile, then bring in the appliance crew. Crown molding, baseboards, and window casing follow. By day 35, your kitchen is functional.

Stage 5: Punch-List and Final Walkthrough (Days 36-42)

We test every outlet, every drawer glide, every appliance cycle, the disposal, the dishwasher, the under-cabinet lights. Cabinet doors get adjusted, paint gets touched up, and we walk the room together. Nothing gets signed off until you say it’s right. Every full kitchen remodel we do carries our 730-Day Done Right Promise: if something isn’t right, we come back and make it right with no runaround.

The Choices You’ll Make During a Full Kitchen Remodel

Decisions drive both the timeline and the budget, and in our experience these are the ones that matter most. You’ll sit down with us early in the process and pick each one.

• Cabinet construction and door style. Stock cabinets off a warehouse shelf keep costs down and ship fast. Semi-custom, which is what most Arcadia homeowners choose, lets you spec plywood boxes, soft-close hardware, and true wood door fronts in the exact finish you want. We install a lot of KraftMaid for this tier. Full custom cabinetry, built to your dimensions, adds cost and lead time but solves awkward layouts common in older wood-frame homes around downtown Arcadia.
• Countertop material. Laminate is the budget option. Quartz and solid surface give you durability without sealing. Granite and butcher block bring character. Each changes the price by thousands, and each has a different templating timeline. We’ll walk you through the trade-offs before you commit.
• Flooring that runs wall to wall. Luxury vinyl plank handles Arcadia’s humidity and occasional slab moisture without buckling. Tile is cooler underfoot and nearly indestructible. Hardwood reads warmer but needs more care in a kitchen with a high water table underneath.
• Layout changes, load-bearing walls, and plumbing relocation. This is the single biggest cost driver. Keeping the sink, range, and dishwasher in their existing locations avoids moving drain lines and vents through the slab or crawl space. Opening a wall between the kitchen and dining room adds structural engineering and a beam, which adds real dollars but transforms the feel of the home. We’ll give you the straight number for both paths so you decide with your eyes open.

What Full Kitchen Remodeling Costs in Arcadia, FL

A full kitchen remodel in Arcadia lands between $14,000 and $45,000. Where your project falls inside that spread depends on five real factors we see on every job out here.

The footprint of the kitchen sets the baseline. A 100-square-foot galley kitchen costs less to gut, re-wire, re-plumb, and finish than a 250-square-foot open-plan space with an island. The condition of what’s behind the walls matters more in Arcadia than in newer-build markets. If we open the wall and find unpermitted post-Charley framing that needs correction, or a bottom plate rotted from decades of slab moisture, that work has to happen before new drywall goes up, and it adds to the rough-in phase. Layout changes that move the sink or range across the room require cutting into and patching the slab to re-route drain lines, which is labor-intensive and adds days to the permit cycle. Material grade drives the other half of the range: stock cabinets versus semi-custom, laminate counters versus quartz, a standard appliance package versus pro-style ranges and vent hoods. The permit itself adds a few hundred dollars, and in Arcadia the inspection cycle takes what it takes. We budget for it in the timeline and the price.

Every estimate we write is a fixed-price, line-item quote. You see what each piece costs before you sign. The number on the estimate is the number you pay unless you add scope. Nothing changes mid-stream without your written approval. Call (844) 638-7249 and we’ll walk your actual kitchen, measure it up, and give you a real number, not a guess.

What Arcadia Homes Specifically Do to This Job

If you’ve renovated in a newer subdivision, you have not renovated in Arcadia. The housing stock here runs older and harder. Many of the wood-frame homes in the historic downtown core were built between the 1920s and 1960s, and a full kitchen remodel in one of them almost always uncovers something: knob-and-tube wiring remnants that need full replacement to meet load requirements for modern appliances, sagging floor joists under where the old cast-iron sink sat for 70 years, or stud bays that were wet at some point from Peace River flooding and were never properly dried out. Then there’s the post-Charley layer. We work on homes all through DeSoto County that were patched between 2004 and 2007 by crews that swept in after the storm. When we demo a kitchen from that era, we find framing splices with no structural connectors, hurricane straps nailed with the wrong fastener pattern, and drywall seams that were taped but never properly bedded. None of that stays in our finished walls. We fix it, strap it, and get the rough-in inspected before we close up, because the county inspector is going to look, and because you should not have to wonder what’s behind your backsplash.

The high water table is the other constant here. We always check the slab and sill plate condition when the old flooring comes up. If there’s moisture migration, we spec a vapor barrier or an underlayment rated for slab moisture before the new floor goes down. It’s a step a builder from a drier inland market might skip, and it’s the step that keeps your floor flat and tight five years later.

Frequently Asked Questions About Full Kitchen Remodeling in Arcadia

Get a Fixed-Price Estimate for Your Full Kitchen Remodel in Arcadia

If you’re planning a full Kitchen Remodeling in Arcadia, we’ll come out, measure your space, and hand you a written price that covers every line of work. No rough numbers, no change orders unless you add scope. Our Kitchen Remodeling crew works across Arcadia and the surrounding area, and homeowners often pair a full kitchen overhaul with Full Bathroom Remodeling in Arcadia or a Walk-In Showers & Shower Remodeling in Arcadia project. Whether it’s just the kitchen or a bigger scope, we’ll give you the same straight number and the same 730-Day Done Right Promise on every piece of the work. Call Groundwork Construction Co. at (844) 638-7249 for your free estimate and design consult.

Written by Derek Hollenbeck, Owner at Groundwork Construction Co., serving Arcadia and DeSoto County since 2014.