Windows & Doors in Fort Myers - Free Measure, Exact Written Quote

Salt Air, Hurricane Rules, and Windows That Actually Hold Up

Window and door decisions in Fort Myers split in two directions. One path uses standard aluminum frames and uncoated hardware that looks fine for three or four years, then pits, corrodes, and leaks at the corners. The other path specifies marine-grade frames, stainless fasteners, and Miami-Dade-approved impact glazing rated for 160+ mph wind zones. The second path costs more upfront, $800-$1,200 more per opening on average, but it avoids the $15,000 whole-house redo that shows up inside a decade when the salt air eats through the cheap spec. We see this play out constantly in older Fort Myers neighborhoods, where original 1970s and 1980s windows have etched to the point of opacity and sliding door tracks have seized solid from rust. On a recent job along the McGregor corridor, our crew pulled corroded aluminum windows from a concrete-block home built in 1978. The miter joints had opened, water had soaked the wood bucks inside the block openings, and the homeowner was fighting mold on the drywall returns every wet season. We installed Miami-Dade-approved impact windows with 316 stainless steel hardware and marine-grade powder-coated frames, taped and flashed the rough openings to the new FEMA-required elevation, and added $4,800 to the job compared to a standard inland replacement. That $4,800 bought an end to the salt-driven failure cycle. If you are pricing Windows & Doors in Fort Myers, call (844) 638-7249 for a free estimate that accounts for where your home actually sits relative to the salt and the flood maps.

Call (844) 638-7249

Fast, Reliable Windows & Doors Across Fort Myers

We stock impact-rated windows, sliding glass doors, and entry systems configured for Fort Myers’s specific wind zone and exposure category. Our crews know how to flash block openings in 1950s-era CMU homes, how to re-frame bucked-out openings when the original wood has rotted, and how to schedule around Lee County’s post-Ian permit backlogs. We dispatch from our South Florida hub, but our Fort Myers teams work locally and carry the hardware and flashing materials that match coastal Florida construction, not inland track-home specs. When you call (844) 638-7249, a live person answers, 24/7. No voicemail black hole, no waiting until Monday. That matters during hurricane season when a broken window or a jammed sliding door is a security and water-intrusion problem, not just a maintenance item.

Why Groundwork Construction Co. Is Fort Myers’s Preferred Windows & Doors Contractor

Fort Myers homeowners have spent the years since Hurricane Ian learning to spot the difference between a licensed local operation and an out-of-state crew that blew in after the storm and disappeared with the deposit. Lee County ran joint enforcement sweeps with DBPR after Ian specifically because unlicensed contractors flooded the market and left non-compliant work behind. We carry state licensing, we pull Lee County permits, and we pass elevation and wind-load inspections the first time. Our technicians arrive in uniform, background-checked, and driving marked vehicles, not an unmarked pickup. Every project is covered by our 730-Day Done Right Promise. If it is not done right, we make it right. That guarantee is one of the longest workmanship warranties in residential construction, and it means exactly what it says.

Our Windows & Doors team has worked on everything in Fort Myers: 1960s concrete-block ranches near the river in Edison Park, stilt homes in Island Park that needed elevated sill pans after FEMA re-mapped the flood zones, and newer stucco homes in Gateway where the builder-grade windows never met impact code to begin with. We know which subdivisions sit in AE flood zones and which are in the X-shaded zones that still require wind-borne debris protection. That local knowledge changes the hardware we specify and the flashing details we write into every quote. Written line-item quotes, no change orders, and upfront pricing that accounts for the coastal spec from day one. Call (844) 638-7249 to schedule your free estimate.

Our Windows & Doors Services in Fort Myers

Impact Windows & Doors

Fort Myers sits in a Wind-Borne Debris Region with a design wind speed of 160+ mph under the Florida Building Code. That is not optional. Impact windows here must carry Miami-Dade or Florida Product Approval for large-missile impact, and the frames must be anchored to resist both positive and negative wind pressures that standard inland windows are never tested against. We install Andersen and Pella impact-rated lines with laminated glass, reinforced frames, and stainless steel hardware that will not corrode from the salt spray that drifts in off the Caloosahatchee. Typical impact window installation in Fort Myers runs $8,000-$25,000 depending on opening count, frame material, and whether we are replacing bucked-out openings or setting new-construction flanges into block.

Window Replacement

Most Fort Myers homes built before 2002 have single-pane aluminum windows with mechanically fastened corners that have loosened over decades of thermal cycling and hurricane vibration. We replace these with impact-rated or high-performance insulated units, and we address the wood buck deterioration that is almost guaranteed in block homes where the original flashing was tar paper stapled to the sheathing. Window replacement in Fort Myers runs $4,500-$15,000 for a typical single-family home. The spread depends on whether you need opening re-framing, new interior trim, or sill height adjustments to meet post-Ian elevation certificates. We specify 316 stainless fasteners on every exterior window in coastal exposure zones, not the 304-grade hardware that pits within a few years.

Hurricane Impact Windows

After Ian, Lee County’s permit office processed tens of thousands of window and door permits, and the most common rejection we see is for sill heights that do not clear the freeboard requirement on the new FEMA advisory flood maps. Base Flood Elevations rose by 2 to 4 feet in many Fort Myers parcels, meaning a window that met code in 2020 may now sit too low to pass an elevation certificate inspection. We coordinate sill height, flood-proofing, and wind-load documentation with our permit runners so you do not get a stop-work order or a failed final inspection. This dual requirement, high wind rating plus elevated sills, is unique to coastal Fort Myers and does not apply the same way inland in Lehigh Acres or Estero.

Sliding & Patio Doors

Sliding glass door tracks corrode fast in Fort Myers. Uncoated steel rollers and incompatible stainless components create galvanic corrosion, especially in homes within a mile of the river or the Gulf. We install impact-rated sliding doors with marine-grade tracks, sealed bearing assemblies, and stainless multipoint locks that will not seize after a season of salt and humidity. If your current door has become hard to slide or will not seal against wind-driven rain, the track and roller assembly is likely shot, and patching it buys you maybe a year. We stock track and roller kits for major brands so most replacements happen in a single visit.

Trusted Brands We Service in Fort Myers

We install and service Andersen, Pella, Marvin, and other premium window and door lines rated for the Florida coastal market. Our brand partnerships mean direct access to factory support, warranty processing, and custom sizing, not whatever the local supply house has in the yard. For Fort Myers homeowners, that means lead times are predictable, hardware is matched to coastal exposure, and warranty claims get handled through the manufacturer without finger-pointing. We also work with Oldcastle and Quikrete products for the block work and sill pans required when we re-frame openings in CMU walls, because the substrate has to hold up as long as the window it supports. Call (844) 638-7249 for a free estimate and a written quote that lists every brand and SKU before we order anything.

Common Windows & Doors Problems We See in Fort Myers Homes

• Aluminum frame pitting and corner failure near the Caloosahatchee. Salt spray and humidity eat the anodized coating on aluminum frames, especially on east-facing elevations. Once the miter joints open, water migrates into the block cavity, rots the wood buck, and the window loses structural connection to the wall.
• Sliding door tracks seizing from galvanic corrosion. Uncoated steel rollers paired with aluminum tracks create a battery in the presence of salt moisture. The track pits, the rollers grind, and eventually the door will not move. Coastal Fort Myers homes need sealed stainless bearing assemblies, not the standard kit.
• Impact windows that pass wind-load but fail elevation inspection. We see this constantly in post-Ian rebuilds. Contractors install impact-rated windows at the original sill height without checking the new FEMA Base Flood Elevation. The windows meet the wind code but blow the elevation certificate, and the homeowner gets stuck re-permitting the openings.
• Single-pane condensation and frame sweating in older block homes. Fort Myers’s humidity drives moisture through single-pane glass and uninsulated aluminum frames. The condensation drips onto drywall returns, feeds mold inside the wall cavity, and degrades the texture and paint. Upgrading to insulated impact units stops the sweating and cuts the AC load in the affected rooms.

Pricing for Windows & Doors in Fort Myers, FL

We Also Serve Cities Near Fort Myers

Our crews cover Fort Myers neighborhoods from McGregor to Gateway, and we also serve North Fort Myers, Cape Coral, Lehigh Acres, and Estero with the same licensed, uniformed teams and the same upfront pricing. If you are in a neighboring city and need Windows & Doors in Fort Myers quality with local scheduling, call (844) 638-7249 and we will confirm availability for your area.

FAQs - Windows & Doors in Fort Myers