What you’ll actually pay for cabinets and countertops in Pelican Bay, and how long the work takes
A full cabinets-and-countertops job in Pelican Bay typically runs between $14,000 and $45,000, with most condominium and single-family projects we take on falling in the $22,000 to $35,000 range. The work itself spans three to five weeks once materials arrive: demolition and prep take two to four days, cabinet installation runs a week to ten days, countertop templating and fabrication add a week, and final install with plumbing reconnection wraps things up in another three to five days. Call (844) 638-7249 for a free on-site estimate with a written line-item breakdown; you’ll know exactly where every dollar goes before we order a single cabinet box.
How we handle cabinets and countertops from tear-out to final walk-through
We follow a clear five-stage sequence on every Pelican Bay project, whether we’re working in a high-rise tower off Gulf Shore Drive or a single-family home tucked into the interior villa neighborhoods. The goal is straightforward: no surprises, no days with nobody on site, and no change orders that weren’t discussed before the saws started.
Stage one: On-site measurements and final material selections. We come to your home in Pelican Bay, take laser measurements, and walk you through the exact cabinet line, door style, finish, hardware, countertop material, edge profile, and sink configuration. This is the point where every decision gets locked in, so the quote we give you after this visit is the number you’ll pay. A typical measurement-and-selection appointment runs 90 minutes to two hours.
Stage two: Demolition and wall prep. We protect floors, seal off the work zone to contain dust, and remove existing cabinets, countertops, and backsplash. Because many Pelican Bay condos share plumbing risers with adjacent units, we coordinate water shutoffs with the building’s management days in advance. With kitchens built in the 1980s and 1990s, we often find water damage behind old sink base cabinets once the drywall comes off; we assess it on the spot, photograph it, and walk you through exactly what needs to happen before we proceed. Demolition and prep take two to four working days.
Stage three: Cabinet installation. Base and wall cabinets go in, leveled and anchored to the studs. On high-rise jobs where walls are concrete block or post-tension slab, we use the correct fastening system for masonry; no toggle bolts and crossed fingers. This stage runs five to eight business days depending on kitchen size and whether we’re doing an island, a pantry wall, or a wet bar as part of the scope. Once cabinets are set, we have you walk the kitchen with the lead installer to confirm placement before anything gets locked behind stone.
Stage four: Countertop template, fabrication, and install. A fabricator comes to the jobsite to laser-template the installed cabinets. That template becomes the cut file for your slab. Fabrication typically takes five to seven business days. Install day is fast: the countertop crew brings the pieces in, sets them, seams them, and mounts the sink. We coordinate plumbing reconnection immediately after so you have a working sink the same day or the next morning.
Stage five: Final trim, hardware, and walk-through. We install cabinet hardware, toe kicks, any remaining trim or filler pieces, and do a full quality check. We then walk the completed job with you and address every item before we call it done. The entire project, from the first day of demolition to the final walk-through, lands between three and five weeks.
The real choices you’ll make for cabinets and countertops in Pelican Bay
Every cabinet-and-countertop job we do in Pelican Bay comes down to a handful of material and configuration decisions. Here are the ones that shape the budget and the finished look the most:
- Cabinet construction grade. Stock cabinets from brands like KraftMaid ship faster and cost less, but you’re locked into set widths and fewer finish options. Semi-custom and full-custom lines let you dial in every dimension, door profile, and interior fitting. In Pelican Bay condos with 8-foot ceilings and soffits, going semi-custom often means we can push cabinets closer to the ceiling without an awkward filler strip.
- Door style and finish. Shaker doors in painted maple are the workhorse choice for most kitchens we do here: clean, durable, and priced in the middle of the range. Stained hardwood, thermofoil, and high-gloss lacquer each move the price and the maintenance profile. High-gloss reads contemporary but shows fingerprints in a busy Gulf-view kitchen.
- Countertop material. Quartz is the most common choice in Pelican Bay right now: non-porous, no sealing required, and consistent slab-to-slab color. Granite runs slightly lower in cost but needs annual sealing. Marble and quartzite sit at the top of the range: stunning, but they etch and stain more readily. We’ll walk you through the trade-offs honestly before you commit to a slab.
- Edge profile and sink mounting. A standard eased edge is included in most quartz and granite packages. Ogee, waterfall, and mitered-edge profiles add fabrication time and material cost. Undermount sinks are standard on stone tops; farmhouse and integrated sinks bump the price up.
- Island configuration. A simple rectangular island with cabinets on one side is the budget-friendly option. Adding seating overhangs, waterfall ends, a prep sink, or power outlets turns the island into a more involved installation. In open-plan Pelican Bay condos where the island is the visual centerpiece, this is where many homeowners put the bulk of their design budget.
What cabinets and countertops cost in Pelican Bay, FL
A straightforward cabinet-and-countertop replacement in Pelican Bay lands between $14,000 and $45,000. The spread looks wide because a galley kitchen in a 1,200-square-foot villa starts in a completely different place than a full cook’s kitchen with an island, a wet bar, and floor-to-ceiling pantry storage in a Gulf-front tower. Here are the five variables that move the number most:
- Linear footage of cabinetry. Every additional base cabinet, wall cabinet, or tall pantry unit adds material and install cost. A kitchen with 18 linear feet of cabinets costs fundamentally less than one with 30.
- Countertop square footage and slab selection. Standard quartz on 40 square feet of countertop runs in one range. A rare quartzite slab with a waterfall island on 70 square feet is a different conversation. The slab itself is a commodity; shipping and fabrication are what move the price.
- Existing conditions behind the walls. In Pelican Bay buildings from the 1980s and 1990s, we sometimes open a wall and find corroded plumbing stub-outs, mold behind an old sink base, or electrical that was never brought up to current code. Fixing those things is not part of the base cabinet-and-countertop scope, but we’ll flag them with photos and a written change order before spending a dollar of your money.
- Plumbing and electrical relocations. Moving a sink, adding a pot filler, relocating a dishwasher or range outlet - all of that requires rough-in work and a permit amendment. It adds scope, time, and cost, but it’s often the one thing that transforms how the kitchen actually functions day to day.
- Permit scope and condo association requirements. Structural changes require a building permit from Collier County and, for condominium towers, approval from the association’s architectural review committee. Some Pelican Bay buildings require licensed structural engineering review before any slab penetration, which adds engineering cost and lead time. Our estimate includes the permit line item upfront.
Every estimate we write for a Pelican Bay job includes the cabinets, countertops, sink, hardware, demolition, installation, and a permit fee line. What it typically does not include is the backsplash (that’s a separate scope - we price it alongside if you want it done as part of the same project) and any underlying structural or plumbing repairs we can’t see until the walls are open. When we find something, we show you. You approve the additional work in writing before we proceed. That’s how a written estimate should work, and it’s the only way we do it.
What Pelican Bay’s specific housing stock does to a cabinet-and-countertop job
Most kitchens we renovate in Pelican Bay sit inside luxury high-rise and mid-rise condominium towers built between the mid-1980s and early 2000s. Those buildings share a set of constraints that you don’t encounter in a typical single-family subdivision. The biggest one: post-tension concrete slabs. Cutting or coring into a slab to relocate a drain line without current engineering drawings that locate the tendons can sever a live cable. That’s structural damage, and it’s irreversible. We pull the building’s as-built drawings and coordinate with a licensed structural engineer before any slab work happens on a Pelican Bay tower job - a step that adds time but removes risk entirely.
The other layer here is the building’s own review process. Most Pelican Bay condominium associations require architectural committee approval, plumbing riser coordination, and insurance certificates before we can even schedule a freight elevator. We handle all of that paperwork so you don’t have to chase down forms. The direct Gulf exposure matters too: salt air chews through builder-grade cabinet hardware faster than you’d think. For oceanfront and near-beach units, we strongly recommend stainless or solid-brass hardware and fully-sealed cabinet box joinery - small material choices that make a real difference five and ten years out.
Collier County permitting adds its own rhythm. A cabinet-only replacement with no plumbing or electrical changes often qualifies as a finish remodel and sails through. The moment we touch plumbing, electrical, or structural walls, we pull a full building permit, and the job gets inspected. We pull the permits, schedule the inspections, and stand behind the work. That’s the only way to do cabinets and countertops in a building where the next owner’s inspector will absolutely check whether the work was permitted.
If your kitchen overhaul is part of a wider plan, we can coordinate the cabinets and countertops as part of a full Kitchen Remodeling in Pelican Bay scope. And homeowners tackling a kitchen often ask us to look at an adjoining bathroom while we’re on site; more than a few Pelican Bay projects have expanded to include a Walk-In Showers & Shower Remodeling in Pelican Bay or a Tub-to-Shower Conversion in Pelican Bay once the walls are open and the crew is already mobilized.
Serving Pelican Bay, FL - Our Local Coverage Area
We’re based in the Pelican Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently asked - cabinets and countertops in Pelican Bay
Three to five weeks once materials are on site. Demolition and wall prep take two to four days, cabinet installation runs a week to ten days, countertop fabrication takes five to seven days, and final install with plumbing reconnection runs three to five days. High-rise condo jobs in Pelican Bay can add a few days for freight elevator scheduling and building-mandated work hours. Call (844) 638-7249 and we’ll give you a real timeline based on your specific kitchen.
If you’re swapping cabinets and countertops without moving plumbing, electrical, or structural walls, it often falls under a finish remodel and may not require a full building permit in Collier County. The moment we relocate a sink, add an outlet, or move a wall, a permit is required. We pull all permits for the job and schedule every inspection; you won’t have to deal with the county at all. For Pelican Bay condos, the association’s own review process runs parallel to the county permit and typically adds a week to pre-construction.
Yes, and it’s the most common scope we do in Pelican Bay: new cabinets and countertops that keep the sink, dishwasher, and range exactly where they are. Keeping the footprint the same usually means the job costs less, takes fewer weeks, and avoids plumbing or electrical rough-in permits. We’ll still inspect the existing plumbing connections while the old cabinets are out and flag anything that should be replaced.
Most projects we quote in Pelican Bay land between $22,000 and $35,000 for a complete kitchen with semi-custom cabinets, quartz countertops, a standard undermount sink, and hardware. That number moves with linear footage, slab selection, island configuration, and anything unexpected we find once the walls are open. Every quote we write is a fixed-price, line-item estimate. No allowances that balloon later. Call (844) 638-7249 for a free on-site quote specific to your kitchen.
The cabinet manufacturers we work with, including KraftMaid, carry their own material warranties that typically run anywhere from five years to a limited lifetime warranty depending on the product line. On top of that, every installation we do in Pelican Bay is covered by our 730-Day Done Right Promise: if something isn’t right, we make it right. That’s two full years of workmanship coverage, and it’s one of the longest guarantees in residential construction. We answer the phone when you call, 24/7, at (844) 638-7249.
Get a free estimate for cabinets and countertops in Pelican Bay
You’ll get a written, line-item price before you commit to anything. We take measurements, walk through your material and layout options, and hand you a fixed number - no allowances, no change-order games later. Call (844) 638-7249 to schedule your free on-site estimate. A live person answers, day or night, and we’ll have a background-checked, uniformed team at your door in Pelican Bay ready to get the job done right. Our kitchen remodeling crew handles everything from the first measurement to the final walk-through, and every project is backed by our 730-Day Done Right Promise.
Written by Derek Hollenbeck, Owner at Groundwork Construction Co., serving Pelican Bay with upfront pricing and written estimates on every cabinet and countertop project.